40 Watts
xppower.com
JCP Series
•
•
•
•
•
•
•
2:1 Input Range
Single, Dual & Triple Outputs
-40 °C to +100 °C Operating Temperature
High Efficiency up to 92%
Six-sided Metal Case
Fixed 350 kHz Switching Frequency
Continuous Short Circuit Protection
Specification
Input
General
Input Voltage Range
• 12 VDC (9-18 VDC)
Efficiency
• See table
24 VDC (18-36 VDC)
48 VDC (36-75 VDC)
Isolation Voltage
• 1500 VDC Input to Output
1500 VDC Input to Case
Input Current
Input Filter
• See table
Output return connected to case
• Pi network
Switching Frequency
MTBF
• 350 kHz typical
Undervoltage Lockout • Turn on >71% nominal input
• >600 kHrs to MIL-STD-217F
Turn off <67% nominal input
Environmental
Output
Operating Temperature • -40 °C to +100 °C, derate from 100% load
Output Voltage
Output Voltage Trim
Minimum Load
Line Regulation
• See table
10%
• See table
at +60 °C to 0% load at +100 °C
•
Case Temperature
Storage Temperature
Cooling
• +100 °C max
• -55 °C to +125 °C
• Convection-cooled
• Up to 90%, non-condensing
•
0.5% max for single & dual outputs,
1.0% max for V1 of triple outputs,
5.0% for V2 & V3
Operating Humidity
Shock
• 30 g, half sine wave 18 ms pulse applied
3 times on each of 6 axes
Load Regulation
•
0.5% max single & dual outputs,
2.0% max for V1 of triple outputs,
5.0% for V2 & V3
Vibration
• 5-500 Hz, 3 g, for 10 mins on each
of 3 axes
Setpoint Accuracy
Voltage Balance
Ripple & Noise
•
•
1.5% max
2.0% max
EMC
• 2.5, 3.3 & 5.0 V models 50 mV pk-pk max
12.0 & 15.0 V models 75 mV pk-pk max
(20 MHz bandwidth)
Emissions
• EN55022 Level A conducted & radiated
with external components - contact
technical sales
Transient Response
• 5% max deviation, recovery to within
1% in 300 µs for a 25% load change
ESD Immunity
• EN61000-4-2, Level 2 Perf Criteria A
• EN61000-4-3, 3 V/m Perf Criteria A
• EN61000-4-6, 3 V rms Perf Criteria A
Radiated Immunity
Conducted Immunity
Temperature
Coefficient
•
0.02%/°C
Overvoltage Protection • 2.5 V models 3.6 V typical,
3.3 V models 3.9 V typical,
5.0 V models 6.2 V typical,
12.0 V models 15.0 V typical,
15.0 V models 18.0 V typical
Overcurrent Protection • 110-140%
Short Circuit Protection • Continuous, trip & restart (Hiccup mode)
Remote On/Off
Thermal Protection
Remote Sense
• ON >3.5 VDC or open circuit
OFF <1.8 VDC
• Shuts down when case temperature
measures +110 °C typical
• Compensates for up to 10% voltage drop
single output models only