1N4460US thru 1N4496US
1N6485US thru 1N6491US
VOIDLESS-HERMETICALLY-SEALED
SURFACE MOUNT 1.5 WATT GLASS
ZENER DIODES
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This surface mount Zener Voltage Regulator series is military qualified to MIL-
PRF-19500/406 and is ideal for high-reliability applications where a failure
cannot be tolerated. These industry-recognized 1.5 Watt Zener Voltage
Regulators are hermetically sealed with voidless-glass construction using an
internal metallurgical bond. It includes Zener selections from 3.3 to 200 volts in
standard 5% tolerances as well as tighter tolerances identified by different
suffix letters on the part number. They are also available in axial-leaded
packages (see separate data sheet for 1N4460 thru 1N4496 and 1N6485 thru
1N6491). Microsemi also offers numerous other Zener products to meet higher
“A” Package
(or “D-5A”)
and lower power ratings in both thru-hole and surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
•
Popular JEDEC registered series
Voidless hermetically sealed glass package
Triple-layer passivation
•
Regulates voltage over a broad operating current
and temperature range
•
•
Extensive selection from 3.3 to 200 V
Standard voltage tolerances are plus/minus 5% with
no suffix
Internal “Category I” Metallurgical bonds for 1N4462US
thru 1N4496US and “Category III” for 1N6485US thru
1N6491US as well as 1N4460US and 1N4461US
•
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
•
•
JAN, JANTX, JANTXV, and JANS available per MIL-
PRF-19500/406
•
•
•
Extremely robust construction
Axial-leaded equivalents also available (see separate
data sheet for 1N4460 thru 1N4496 and 1N6485 thru
1N6491)
Nonsensitive to ESD per MIL-STD-750 Method 1020
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
•
•
Operating Temperature: -65oC to +175oC.
Storage Temperature: -65oC to +200oC.
•
CASE: Hermetically sealed voidless hard glass with
Tungsten slugs
Power Dissipation: 1.5 Watts @ TEC = 145oC
Thermal Resistance: 20oC/W junction to end cap
Thermal Impedance at 10 ms: 4.5oC/W (1N4462US
thru 1N4496US) and 7.5oC/W (1N6485US thru
1N6491US as well as 1N4460US and 1N4461US)
•
TERMINATIONS: End caps are Copper with Tin/Lead
(Sn/Pb) finish. Note: Previous inventory had solid
Silver end caps with Tin/Lead (Sn/Pb) finish.
•
•
•
•
MARKING: Polarity band only
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-481-B
Weight: 193 mg
•
Forward Voltage: 1.00 V at 200 mA and 1.5 V at 1.0 A
ELECTRICAL CHARACTERISTICS @ 25oC
NOMINAL
ZENER
VOLTAGE CURRENT IMPEDANCE
MAXIMUM
DYNAMIC
MAXIMUM KNEE
IMPEDANCE
ZZK @ IZK
MAXIMUM
REVERSE
CURRENT
IR @ VR
MAXIMUM
CONTINUOUS
CURRENT
IZM
MAXIMUM
SURGE
CURRENT
TYPE
TEST
VZ
IZT
ZZT @ IZT
I
ZSM
VOLTS
3.3
3.6
3.9
4.3
4.7
5.1
5.6
mA
76.0
69.0
64.0
58.0
53.0
49.0
45.0
OHMS
OHMS
400
400
400
400
500
500
600
mA
1.0
1.0
1.0
1.0
1.0
1.0
1.0
μA
50
50
35
5.0
4.0
1.0
0.5
VOLTS
mA
433
397
366
332
304
280
255
AMPS
4.2
3.9
3.6
3.3
3.0
2.7
2.5
1N6485US
1N6486US
1N6487US
1N6488US
1N6489US
1N6490US
1N6491US
10
10
9
9
8
1.0
1.0
1.0
1.0
1.0
1.0
2.0
7
5
Copyright © 2007
4-27-2007 REV D
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503