Data Sheet
August 2000
JAHW050F, JAHW075F, and JAHW100F Power Modules:
dc-dc Converters; 36 to 75 Vdc Input, 3.3 Vdc Output; 33 W to 66 W
Features
■ Small size: 61.0 mm x 57.9 mm x 12.7 mm
(2.40 in. x 2.28 in. x 0.50 in.)
■ High power density
■ Very high efficiency: 88% typical
■ Low output noise
■ Constant frequency
■ Industry-standard pinout
■ Metal baseplate
■ 2:1 input voltage range
■ Overtemperature protection
The JAHW Series Power Modules use advanced, surface-
■ Overcurrent protection
mount technology and deliver high-quality, efficient, and com-
pact dc-dc conversion.
■ Output overvoltage protection
■ Remote sense
Applications
■ Remote on/off
■ Adjustable output voltage
■ Case ground pin
■ Distributed power architectures
■ Computer equipment
■ Auto-restart after overcurrent shutdown
■ ISO * 9001 Certified manufacturing facilities
■ UL† 1950 Recognized, CSA‡ 22.2 No. 950-95
Certified, and VDE 0805 (EN60950, IEC950)
Licensed
■ Communications equipment
Options
§
■ Heat sinks available for extended operation
■ Choice of remote on/off logic configuration
■ CE mark meets 73/23/EEC and 93/68/EEC
directives**
Description
The JAHW050F, JAHW075F, and JAHW100F Power Modules are dc-dc converters that operate over an input
voltage range of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The outputs are fully isolated
from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maxi-
mum power ratings from 33 W to 66 W at a typical full-load efficiency of 88%.
The sealed modules offer a metal baseplate for excellent thermal performance. Threaded-through holes are
provided to allow easy mounting or addition of a heat sink for high-temperature applications. The standard fea-
ture set includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power
applications.
* ISO is a registered trademark of the International Organization for Standardization.
† UL is a registered trademark of Underwriters Laboratories, Inc.
‡ CSA is a registered trademark of Canadian Standards Association.
§ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should
be followed. (The CE mark is placed on selected products.)