ISOW1412, ISOW1432
SLLSF86B – MAY 2018 – REVISED OCTOBER 2021
ISOW14x2 Isolated RS-485/RS-422 Transceiver with Integrated Low-Emissions, Low-
Noise, High-Efficiency DC-DC Converter
– UL 1577 component recognition program
– IEC 62368-1, IEC 61010-1, IEC 60601-1 and
1 Features
•
Meets or exceeds the requirements of the TIA/
EIA-485A standard
Data rates
GB 4943.1-2011 certifications
2 Applications
•
•
•
•
•
•
Factory automation
Building automation
Industrial transport
Solar inverters, protection relay
Motor drives
– ISOW1412 : 500 kbps
– ISOW1432 : 12 Mbps
Integrated low-emissions DC-DC converter with
low-emissions, low-noise
– Meets CISPR 32 Class B and EN 55032 Class
B with margin on a two-layer PCB
– Low frequency power converter at 25 MHz
enabling low noise performance
Additional 2 Mbps GPIO channel
High efficiency output power
•
3 Description
The ISOW14x2 devices are galvanically-isolated
RS-485/RS-422 transceivers with a built-in isolated
DC-DC converter, that eliminates the need for a
separate isolated power supply in space constrained
isolated designs. The low-emissions, isolated DC-
DC converter meets CISPR 32 radiated emissions
Class B standard with just two ferrite beads on
a simple two-layer PCB. Additional 20 mA output
current can be used to power other circuits on the
board. An integrated 2 Mbps GPIO channel helps
remove any additional digital isolator or optocoupler
for diagnotstics, LED indication or supply monitoring.
•
•
– Typical efficiency: 46%
– VISOOUT accuracy: ±5%
– Additional output current: 20 mA
Independent power supply for RS-485 & DC-DC
– Logic supply (VIO): 1.71 V to 5.5 V
– Power converter supply ( VDD): 3 V to 5.5 V
RS-485 with PROFIBUS compatibility
– Open, short, and idle bus failsafe
– 1/8 unit load: up to 256 nodes on bus
– Glitch-free power up and power down
Reinforced and Basic isolation options
High CMTI: 100-kV/µs (typical)
High ESD bus protection
– HBM: ±16 kV
– IEC 61000-4-2 contact discharge: ±8 kV
Operating temperature range: -40°C to 125°C
Current limit and thermal shutdown
20-pin wide SOIC package
•
•
Device Information
ISOW1412
ISOW1432
ISOW1412B
ISOW1432B
•
•
•
FEATURE
Protection Level
Surge Test Voltage
Isolation Rating
Working Voltage
Package(1)
Reinforced
10 kVPK
Basic
7.8 kVPK
5000 VRMS
5000 VRMS
•
•
•
1000 VRMS/1500VPK 1000 VRMS/1500VPK
DFM (20)
DFM (20)
Body Size
12.83mm x 7.5mm
12.83mm x 7.5mm
•
Section 8.6:
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
– VDE reinforced and basic insulation per DIN
VDE V 0884-11:2017-01
VCC
VIO
VISOIN
Must be connected on PCB,
not connected internally
DE
Y
D
Signal
R
Signal
Isolation
Z
RS485
RS485 Bus
B
MCU
Isolation
RE
A
GISOIN
GNDIO
VISOOUT
GND2
DC-DC
Primary
DC-DC
Secondary
VDD
GND1
Galvanic Isolation
Barrier
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.