ISL97652
®
Data Sheet
December 21, 2006
FN9287.0
4-Channel Integrated LCD Supply with
Dual V Amplifiers
Features
COM
• 8V to 15V input supply
The ISL97652 represents a high power, integrated LCD
supply IC targeted at large panel LCD displays. The
ISL97652 integrates a high power, boost converter for A
• A
VDD
2.8APEAK FET
boost up to 19.5V (OVP threshold), with integrated
VDD
charge
• Overvoltage protection (OVP)
generation, delay switch, regulated V
and V
OFF
ON
slicing circuitry, a buck regulator for logic supply
pumps, V
• 2A integrated A
delay FET, with short circuit protection
• Dual charge pump controllers for V and V
ON
VDD
generation and dual high power V
amplifiers.
COM
ON
buck with integrated 2.5APEAK FET
OFF
Operating at 650kHz or 1.3MHz, the A
boost converter
VDD
• V
• V
LOGIC
features a 2.8A boost FET. A short circuit protected A
VDD
delay switch is integrated to provide sequencing of the A
slicing
ON
VDD
output. Feedback is taken from the far side of the delay FET
for improved regulation and an OVP circuit protects output
side components. The boost features programmable
soft-start.
• Dual high speed V
amplifiers
COM
• 650kHz/1.3MHz switching frequency
• Integrated sequencing
The asynchronous buck converter features an integrated
2.5A FET. It also operates from the 650kHz or 1.3MHz
internal clock and features separate enable and soft-start
control.
• UVLO and OTP protection
• Thermally enhanced 7x7 QFN package
• Pb-free plus anneal available (RoHS compliant)
The dual charge pump controllers used for V
and V
OFF
ON
switching frequency to allow
Applications
generation uses the full F
OSC
the use of small output components for board space
efficiency. V is further processed through an integrated
• LCD-TVs (up to 40”)
• Industrial/medical LCD displays
ON
circuit for reduced flicker.
V
ON-SLICE
Pinout
The integrated amplifiers feature high slew-rate and high
output current capability. They are permanently enabled
when AVIN is present.
ISL97652
(48 LD QFN)
TOP VIEW
Available in the 48 Ld 7mmx7mm QFN package, the
ISL97652 is specified for ambient operation over the
-40°C to +85°C temperature range.
POS1
OUT1
VGL
1
2
3
4
5
6
7
8
9
36 PGND3
35 PGND2
34 PGND1
33 EN1
Ordering Information
PART NUMBER
(Note)
PART
MARKING
TAPE &
REEL
PACKAGE
(Pb-Free)
PKG.
DWG. #
CE
ISL97652IRZ
ISL97652IRZ
-
48 Ld 7x7 QFN L48.7x7
48 Ld 7x7 QFN L48.7x7
VFLK
VDPM
RE
32 EN2
THERMAL
PAD
31 VC
ISL97652IRZ-T ISL97652IRZ
13”
(4k pcs)
30 SS
VGHM
VGH
29 DLY2
28 FREQ
27 VDC
ISL97652IRZ-TK ISL97652IRZ
13”
(1k pcs)
48 Ld 7x7 QFN L48.7x7
FBP 10
GND 11
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
26 PVIN2
25 PVIN1
12
DRVP
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.