ISL9212
®
Data Sheet
June 30, 2008
FN9280.2
Charging System Safety Circuit
Features
The ISL9212 is an integrated circuit (IC) optimized to provide
a Li-ion battery redundant safety protection from failures of a
charging system. The IC monitors the input voltage, the
battery voltage, and the charge current. When any of the
three parameters exceeds its limit, the IC turns off an internal
P-Channel MOSFET to remove the power from the charging
system. In addition to the above protected parameters, the
IC also monitors its own internal temperature and turns off
the P-Channel MOSFET when the die temperature exceeds
+140°C. Together with the battery charger IC and the
protection module in a battery pack, the charging system
using the ISL9212 has triple-level protection and is two-fault
tolerant.
• Fully Integrated Protection Circuit for Three Protection
Variables
- User Programmable Overcurrent Protection Threshold
- Input Overvoltage Protection in Less Than 1µs
- Battery Overvoltage Protection
• High Immunity of False Triggering Under Transients
• High Accuracy Protection Thresholds
• Warning Output to Indicate the Occurrence of Faults
• Enable Input
• Thermal Enhanced TDFN Package
• Pb-Free (RoHS Compliant)
The IC is designed to turn on the internal PFET slowly to
avoid in-rush current at power-up but will turn off the PFET
quickly when input overvoltage is detected, in order to
remove the power before any damage occurs. The ISL9212
has a logic warning output to indicate the fault and an enable
input to allow the system to remove the input power.
Applications
• Cell Phones
• Digital Still Cameras
• PDAs and Smart Phones
• Portable Instruments
• Desktop Chargers
Ordering Information
TEMP.
PART NUMBER
(Note)
PART
MARKING
RANGE
(°C)
PACKAGE
(Pb-free)
PKG.
DWG. #
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
ISL9212IRZ*
-40 to +85 12 Ld 4x3 TDFN
(0.75mm)
L12.4x3A
212Z
ISL9212EVAL1Z Evaluation Board
*Add “-T” suffix for tape and reel.
• Technical Brief TB379 “Thermal Characterization of
Packaged Semiconductor Devices”
NOTE: These Intersil Pb-free plastic packaged products employ special
Pb-free material sets; molding compounds/die attach materials and
100% matte tin plate PLUS ANNEAL - e3 termination finish, which is
RoHS compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
• Technical Brief TB389 “PCB Land Pattern Design and
Surface Mount Guidelines for QFN Packages”
Pinout
ISL9212
(12 LD 4x3 TDFN)
TOP VIEW
Typical Application Circuit
INPUT
VIN
VIN
1
2
3
4
5
6
12 NC
VIN
ISL6292
BATTERY
CHARGER
OUT
11
10
9
OUT
OUT
ILIM
VB
C
1
GND
WRN
NC
EPAD
ISL9212
8
VB
ILIM
NC
7
EN
R
VB
+
EN
R
BATTERY
PACK
ILIM
WRN
GND
NOTE: EPAD must be electrically connected to the GND pin.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006, 2008. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.