DATASHEET
ISL854102
Wide V 1.2A Synchronous Buck Regulator
IN
FN8870
Rev 0.00
July 1, 2016
The ISL854102 is a 1.2A synchronous buck regulator with an
input range of 3V to 40V. It provides an easy to use, high
efficiency, low BOM count solution for a variety of applications.
Features
• Wide input voltage range 3V to 40V
• Synchronous operation for high efficiency
• No compensation required
The ISL854102 integrates both high-side and low-side NMOS
FETs and features a PFM mode for improved efficiency at light
loads. This feature can be disabled if a forced PWM mode is
desired. The part switches at a default frequency of 500kHz,
however, may also be programmed using an external resistor
from 300kHz to 2MHz. The ISL854102 has the ability to utilize
internal or external compensation. By integrating both NMOS
devices and providing internal configuration options, minimal
external components are required, reducing BOM count and
complexity of design.
• Integrated high-side and low-side NMOS devices
• Selectable PFM or forced PWM mode at light loads
• Internal fixed (500kHz) or adjustable switching frequency
300kHz to 2MHz
• Continuous output current up to 1.2A
• Internal or external soft-start
• Minimal external components required
• Power-good and enable functions available
With the wide V range and reduced BOM, the part provides
IN
an easy to implement design solution for a variety of
applications while giving superior performance. It will provide
a very robust design for high voltage industrial applications as
well as an efficient solution for battery powered applications.
Applications
• Industrial control
The part is available in a small Pb-free 4mmx3mm DFN plastic
package with a full-range industrial temperature of -40°C to
+125°C.
• Medical devices
• Portable instrumentation
• Distributed power supplies
• Cloud infrastructure
100
95
90
85
80
75
70
1
2
12
11
SS
FS
COMP
SYNC
BOOT
VIN
R2
R3
CFB
10
9
3
4
FB
CBOOT
100nF
GND
CVIN
10µF
VCC
VIN=12V
VIN=15V
VIN=24V
65
60
CVCC
1µF
5
6
VOUT
PHASE
PGND
PG
EN
L1
22µH
COUT
10µF
55
50
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
OUTPUT LOAD (A)
1
1.1 1.2
INTERNAL DEFAULT PARAMETER SELECTION
FIGURE 2. EFFICIENCY vs LOAD, PFM, V
OUT
= 5V, L = 22µH
1
FIGURE 1. TYPICAL APPLICATION
FN8870 Rev 0.00
July 1, 2016
Page 1 of 19