DATASHEET
4.5V to 18V Input, 5A High Efficiency Synchronous
Buck Regulator
ISL85005, ISL85005A
Features
The ISL85005 and ISL85005A are monolithic, synchronous
buck regulators with integrated 5A, 18V high-side and low-side
FETs. These devices also provide an integrated bootstrap diode
for the high-side gate driver to reduce the external parts count.
These devices have a wide input voltage range to support
applications with input voltage from multi-cell batteries or
regulated 5V and 12V power rails.
• 4.5V to 18V input voltage range
• Internal 5A, 18V high-side and low-side MOSFET switches
• ±1%, 0.8V feedback voltage reference
• Integrated bootstrap diode with undervoltage detection
• Current mode control with internal slope compensation
• Internal or external compensation options
• Default internally set 500kHz switching frequency
• Synchronization capability to external clock (ISL85005)
The ISL85005 and ISL85005A regulate the output voltage
with current mode control and have an internal oscillator. The
switching frequency of the ISL85005 is internally set as
500kHz, and can be synchronized to an external clock signal
with frequency ranges from 300kHz to 2MHz. The ISL85005A
has a fixed 500kHz switching frequency.
• Diode Emulation Mode (DEM) and forced CCM (FCCM)
options (ISL85005)
• Adjustable soft-start time (ISL85005A)
• Output Power-Good (PG) indicator
The ISL85005 has a fixed 2.3ms soft-start, while the
ISL85005A features programmable soft-start to limit inrush
current during startup. With SS pin floating, the soft-start time
of ISL85005A is also 2.3ms.
• Input undervoltage lockout (UVLO), input and output
overvoltage protection
• High-side cycle-by-cycle current limit, low-side forward and
reverse overcurrent protection, and thermal shutdown
The ISL85005 can be configured in either forced Continuous
Conduction Mode (CCM) or Diode Emulation Mode (DEM). DEM
enables high efficiency at light-load conditions. The
ISL85005A always operates in forced CCM.
• Small 12-pin 3mmx4mm Dual Flat No-Lead (DFN) package
with EPAD for enhanced thermal performance
Applications
• Network and communication equipments
• Battery powered systems
• Multifunction printers
The ISL85005 and ISL85005A have built-in protections
including input UVLO protection, input and output overvoltage
protection, high-side cycle-by-cycle current limit, low-side
forward current limit and reverse current limit, and thermal
shutdown.
• Point-of-load regulators
Related Literature
• For a full list of related documents, visit our website
- ISL85005, ISL85005A product pages
• Standard 12V rail supplies
• Embedded computing systems
Typical Application
95
90
85
80
75
70
ISL85005
GND = DEM; VCC = FCCM
SYNC/
MODE
MODE
BOOT
VDD
1
2
3
4
5
6
12
11
C
4
V
IN
PG
EN
PG
4.5V TO 18V
EN
VIN 10
PGND
VIN
9
C
FB
C
6
3
C
5
V
R
1
OUT
2
PHASE
PHASE
8
7
COMP
AGND
12V TO 5V
R
1
5A MAX
65
C
12V TO 3.3V
L
1
60
C
C
12V TO 1.8V
8
9
55
50
0
1
2
3
4
5
OUTPUT CURRENT (A)
FIGURE 1. ISL85005 WITH INTERNAL COMPENSATION
FIGURE 2. EFFICIENCY vs OUTPUT CURRENT
November 28, 2016
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2016. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1
FN8871.0