ISL84467
®
Data Sheet
July 17, 2007
FN6521.0
Ultra Low ON-Resistance, +1.65V to +4.5V,
Single Supply, Quad SPDT (Dual DPDT)
Analog Switch
Features
• ON-Resistance (r
)
ON
- V+ = +4.3V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.39Ω
- V+ = +3.0V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.45Ω
- V+ = +1.8V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.65Ω
The Intersil ISL84467 device is a low ON-resistance, low
voltage, bidirectional, Quad SPDT (Dual DPDT) analog
switch designed to operate from a single +1.65V to +4.5V
supply. Targeted applications include battery powered
• r
Matching Between Channels . . . . . . . . . . . . . . . . . 0.05Ω
Flatness Across Signal Range . . . . . . . . . . . . . . . 0.05Ω
ON
ON
equipment that benefit from low r
(0.39Ω) and fast
• r
ON
switching speeds (t
= 33ns, t
= 16ns). The digital logic
ON
OFF
• Single Supply Operation . . . . . . . . . . . . . . . +1.65V to +4.5V
• Low Power Consumption (PD) . . . . . . . . . . . . . . . . <0.68µW
• Fast Switching Action (V+ = +4.3V)
input is 1.8V logic-compatible when using a single +3V supply.
With a supply voltage of 4.2V and logic high voltage of 2.85V
at both logic inputs, the part draws only 12µA max of ICC
current.
- t
- t
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33ns
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16ns
ON
OFF
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL84467 is offered in small form factor package, alleviating
board space limitations.
• Break-Before-Make
• 1.8V Logic Compatible (+3V supply)
• Low ICC Current when VinH is not at the V+ Rail
• Available in 16 Ld 3x3 TQFN
• ESD HBM Rating
The ISL84467 consists of four SPDT switches. It is configured
as a dual double-pole/double-throw (DPDT) device with two
logic control inputs that control two SPDT switches each. The
configuration can be used as a dual differential 2-to-1
multiplexer/demultiplexer.
- COM Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9kV
- All Other Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6kV
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
TABLE 1. FEATURES AT A GLANCE
ISL84467
• Battery-Powered, Handheld, and Portable Equipment
- Cellular/Mobile Phones
Number of Switches
SW
4
- Pagers
Quad SPDT (Dual DPDT)
0.39Ω
- Laptops, Notebooks, Palmtops
4.3V r
ON
• Portable Test and Measurement
• Medical Equipment
4.3V t /t
ON OFF
33ns/16ns
• Audio and Video Switching
3.0V r
ON
0.45Ω
3.0V t /t
ON OFF
34ns/18ns
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
1.8V r
ON
0.65Ω
1.8V t /t
ON OFF
50ns/25ns
Package
16 Ld 3x3 TQFN
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.