ISL78010
®
Data Sheet
May 30, 2007
FN6501.0
Automotive Grade TFT-LCD Power Supply
Features
The ISL78010 is a multiple output regulator for use in all
TFT-LCD automotive applications. It features a single boost
converter with an integrated 2A FET, two positive LDOs for
• 2A current FET
• 3V to 5V input
• Up to 20V boost output
• 1% regulation on boost output
V
V
and V
generation, and a single negative LDO for
ON
LOGIC
generation. The boost converter can be programmed
OFF
to operate in either P-mode for optimal transient response or
PI-mode for improved load regulation.
• V
-V
-V
-V
or
sequence control
LOGIC BOOST OFF ON
V
-V -V -V
LOGIC OFF BOOST ON
The ISL78010 includes fault protection for all four channels.
Once a fault is detected on either the V
• Programmable sequence delay
• Fully fault protected
, V
or V
BOOST ON
OFF
channels, the device is latched off until the input supply or
EN is cycled. If a fault is detected on the V channel,
LOGIC
the device is latched off until the input supply is cycled. The
channel is not affected by the EN function.
• Thermal shutdown
• Internal soft-start
V
LOGIC
The ISL78010 also includes an integrated start-up sequence
for V , V , V , then V or for V , V
• 32 Ld 5x5 TQFP packages
• Pb-free plus anneal available (RoHS compliant)
,
LOGIC BOOST OFF ON LOGIC OFF
V
, and V . The latter sequence requires a single
BOOST ON
external transistor. The timing of the start-up sequence is set
using an external capacitor.
Applications
• All Automotive LCD Displays
The ISL78010 comes in a 32 Ld 5x5 TQFP package and is
specified for operation over a -40°C to +105°C temperature
range.
Pinout
ISL78010
(32 LD 5X5 TQFP)
TOP VIEW
Ordering Information
PART NUMBER
(Note)
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL78010ANZ*
78010ANZ 32 Ld 5x5 TQFP
Q32.5x5
*Add “-T” or “-TK” suffix for tape and reel. Please refer to TB347 for
details on reel specifications.
32 31 30 29 28 27 26 25
NC
1
VREF
NC
24
NC
DELB
NC
2
3
4
5
6
7
8
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
23
22
21
20
19
18
17
PGND
PGND
PGND
PGND
NC
LX
NC
DRVP
NC
FBN
9 10 11 12 13 14 15 16
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.