EW DESIGNS
EMENT PART
ENDED FOR N
NOT RECOMM
DED REPLAC
DATASHEET
RECOMMEN
ISL8105
ISL6526, ISL6526A
Single Synchronous Buck Pulse-Width Modulation (PWM) Controller
FN9055
Rev 12.00
Sep 30, 2015
The ISL6526, ISL6526A make simple work out of
implementing a complete control and protection scheme for
a DC/DC stepdown converter. Designed to drive N-Channel
MOSFETs in a synchronous buck topology, the ISL6526,
ISL6526A integrate the control, output adjustment,
Features
• Operates from 3.3V to 5V Input
• 0.8V to V Output Range
IN
- 0.8V Internal Reference
monitoring and protection functions into a single package.
- ±1.5% Over Load, Line Voltage and Temperature
The ISL6526, ISL6526A provide simple, single feedback
loop, voltage-mode control with fast transient response. The
output voltage can be precisely regulated to as low as 0.8V,
with a maximum tolerance of ±1.5% over-temperature and
line voltage variations. A fixed frequency oscillator reduces
design complexity, while balancing typical application cost
and efficiency.
• Drives N-Channel MOSFETs
• Simple Single-Loop Control Design
- Voltage-Mode PWM Control
• Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Cycle
The error amplifier features a 15MHz gain-bandwidth
product and 6V/µs slew rate which enables high converter
bandwidth for fast transient performance. The resulting
PWM duty cycles range from 0% to 100%.
• Lossless, Programmable Overcurrent Protection
- Uses Upper MOSFET’s r
DS(on)
• Converter can Source and Sink Current
• Small Converter Size
Protection from overcurrent conditions is provided by
- Internal Fixed Frequency Oscillator
monitoring the r
of the upper MOSFET to inhibit PWM
DS(ON)
-
-
ISL6526: 300kHz
ISL6526A: 600kHz
operation appropriately. This approach simplifies the
implementation and improves efficiency by eliminating the
need for a current sense resistor.
• Internal Soft-Start
• 14 Ld SOIC or 16 Ld 5x5 QFN
• QFN Package:
- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat
No Leads - Package Outline
- Near Chip Scale Package Footprint, which Improves
PCB Efficiency and has a Thinner Profile
• Pb-Free (RoHS Compliant)
Applications
• Power Supplies for Microprocessors
- PCs
- Embedded Controllers
• Subsystem Power Supplies
- PCI/AGP/GTL+ Buses
- ACPI Power Control
- DDR SDRAM Bus Termination Supply
• Cable Modems, Set-Top Boxes, and DSL Modems
• DSP and Core Communications Processor Supplies
• Memory Supplies
• Personal Computer Peripherals
• Industrial Power Supplies
• 3.3V-Input DC/DC Regulators
• Low-Voltage Distributed Power Supplies
FN9055 Rev 12.00
Sep 30, 2015
Page 1 of 18