ISL59910, ISL59913
®
Data Sheet
December 15, 2006
FN6406.0
Triple Differential Receiver/Equalizer
Features
The ISL59910 and ISL59913 are triple channel differential
receivers and equalizers. They each contain three high speed
differential receivers with five programmable poles. The
outputs of these pole blocks are then summed into an output
buffer. The equalization length is set with the voltage on a
single pin. The ISL59910 and ISL59913 output can also be
put into a high impedance state, enabling multiple devices to
be connected in parallel and used in multiplexing application.
• 150MHz -3dB bandwidth
• CAT-5 compensation
- 100MHz @ 600 ft
- 135MHz @ 300 ft
• 108mA supply current
• Differential input range 3.2V
• Common mode input range -4V to +3.5V
• ±5V supply
The gain can be adjusted up or down on each channel by 6dB
using its V
control signal. In addition, a further 6dB of gain
GAIN
can be switched in to provide a matched drive into a cable.
• Output to within 1.5V of supplies
• Available in 28 Ld QFN package
The ISL59910 and ISL59913 have a bandwidth of 150MHz
and consume just 108mA on ±5V supply. A single input
voltage is used to set the compensation levels for the
required length of cable.
• Pb-free plus anneal available (RoHS compliant)
Applications
The ISL59910 is a special version of the ISL59913 that
decodes syncs encoded onto the common modes of three
pairs of CAT-5 cable by the EL4543. (Refer to the EL4543
datasheet for details.)
• Twisted-pair receiving/equalizer
• KVM (Keyboard/Video/Mouse)
• VGA over twisted-pair
• Security video
The ISL59910 and ISL59913 are available in a 28 Ld QFN
package and are specified for operation over the full -40°C to
+85°C temperature range.
Pinouts
ISL59910
(28 LD QFN)
TOP VIEW
ISL59913
(28 LD QFN)
TOP VIEW
VSMO_B
VOUT_B
VSPO_B
VSPO_G
VOUT_G
VSMO_G
VSMO_R
VOUT_R
1
2
3
4
5
6
7
8
22 VSP
VSMO_B
VOUT_B
VSPO_B
VSPO_G
VOUT_G
VSMO_G
VSMO_R
VOUT_R
1
2
3
4
5
6
7
8
22 VSP
21 VINM_B
20 VINP_B
19 VINM_G
18 VINP_G
17 VINM_R
16 VINP_R
15 VSM
21 VINM_B
20 VINP_B
19 VINM_G
18 VINP_G
17 VINM_R
16 VINP_R
15 VSM
THERMAL
PAD
THERMAL
PAD
EXPOSED DIEPLATE SHOULD BE CONNECTED TO -5V
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.