ISL39300A-DAPDK
®
Data Sheet
Augus t 2003
FN8072
PRISM 54Mbps Wireles s Local Area
Features
Network Acces s Point
• Low cost Zero IF (ZIF) architecture
The Intersil ISL39300A WLAN
Access Point is a complete wireless
high speed Network Access Point
• Fully compliant with the IEEE 802.11a, 802.11b and
802.11g WLAN standards
• FCC Certified Under Part 15 to Operate in 2.4 and 5GHz
bands
(AP) utilizing the Intersil PRISM
DuetteTM chip set in conjunction with the 3893 WiSOC
BB/MAC. It conforms to the IEEE 802.11a, 802.11b and
802.11g protocols and therefore operates in both 2.4GHz
ISM and 5GHz UNII frequency bands. It provides a complete
PRISM reference design platform of hardware and software
to system providers or integrators requiring wireless data
communications capability. The Open Source Linux
operating system offers a flexible and extensible
development platform for making customized Access Points.
• ETSI EN 300 328 parts 1 and 2, ETSI EN 301 489 parts 1
and 17 Certified
• Supports all features required for Wi-FiTM Compliant
Access Points
• Support for 54, 48, 36, 24, 18, 12, 9, and 6Mbps OFDM,
11 and 5.5Mbps CCK and legacy 2 and 1 Mbps data rates
• Supports Dual Rx/Tx Antenna Diversity
• Provides 2 Wired ethernet (802.3) ports for WAN and LAN
connection (10/100BaseT speeds)
The Developers Kit includes a WLAN Access Point
reference design, configuration application, source code and
documentation. It supports the IEEE 802.11a/b/g network
specification for DSSS and OFDM signaling, providing
1-54Mbps data rates. Typical operating ranges are shown in
Table 1.
• Supports Power over Ethernet (802.3af according to Draft
3.1) on LAN port
• miniPCI connector for PRISM GT™/Duette add-on card
(Dual cell operation)
• 6 LEDs of which one is user defined
Ordering Information
• Open Source Linux operating system offering a flexible
and extensible platform for feature development
PART NUMBER
DESCRIPTION
CARDS/SET
ISL39300A-DAPDK-EVAL Dual Band Access 1 AP/1 Duette PC
Point Evaluation Kit Card
• Separate Web File Set for easy user-configuration and
upgrading
ISL39300A-DAPDK-CD
Reference Design
NA
• Wizard for Automated IP Configuration
• Enhanced Security via 802.1x, TKIP, and WPA
Packaging
• Wireless Distribution System (WDS) support for wireless
repeater/bridge mode of operation
• 802.11d regulatory domain selection supported
• Inter Access Point Protocol (IAPP) according to latest draft
802.11f standard
• 802.1d support (Spanning tree protocol)
• Multi-homed IP address selection via static IP, DHCP, or
Auto IP
• Internet connection establishment via static IP, DHCP,
PPTP, or PPPoE
• MAC cloning
• NAT/NAPT support
• VPN pass-through support (PPTP & IPSec)
• DHCP server
Sample plastic enclosure.
• SNMPv2 support
• HTTP server
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
1
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. All other trademarks mentioned are the property of their respective owners.
PRISM® is a registered trademark of Intersil Americas Inc. PRISM Duette, PRISM GT, and PRISM and design are trademarks of Intersil Americas Inc.