Low Power RTC with Battery Backed SRAM,
Integrated ±5ppm Temperature Compensation and
Auto Daylight Saving
ISL12020M
Features
• Embedded 32.768kHz Quartz Crystal in the Package
The ISL12020M device is a low power real time clock
(RTC) with an embedded temperature sensor and
crystal. Device functions include oscillator compensation,
clock/calendar, power fail and low battery monitors,
brownout indicator, one-time, periodic or polled alarms,
intelligent battery backup switching, Battery Reseal™
function and 128 bytes of battery-backed user SRAM.
The device is offered in a 20 Ld DFN module that
contains the RTC and an embedded 32.768kHz quartz
crystal. The calibrated oscillator provides less than
±5ppm drift over the full -40°C to +85°C temperature
range.
• 20 Ld DFN Package (for SOIC version, refer to the
ISL12022M)
• Calendar
• On-chip Oscillator Temperature Compensation
• 10-bit Digital Temperature Sensor Output
• 15 Selectable Frequency Outputs
• Interrupt for Alarm or 15 Selectable Frequency
Outputs
• Automatic Backup to Battery or Supercapacitor
• VDD and Battery Status Monitors
The RTC tracks time with separate registers for hours,
minutes, and seconds. The calendar registers track date,
month, year and day of the week and are accurate
through 2099, with automatic leap year correction.
• Battery Reseal™ Function to Extend Battery Shelf
Life
• Power Status Brownout Monitor
• Time Stamp for Battery Switchover
• 128 Bytes Battery-Backed User SRAM
Daylight Savings time adjustment is done automatically,
using parameters entered by the user. Power fail and
battery monitors offer user-selectable trip levels. The
time stamp function records the time and date of
2
• I C-Bus™
• RoHS Compliant
switchover from V
to V power, and also from V
DD
BAT BAT
to V
DD
power.
Applications*(see page 31)
• Utility Meters
• POS Equipment
• Printers and Copiers
• Digital Cameras
Typical Application Circuit
Performance Curve
OSCILLATOR ERROR vs TEMPERATURE
5
1
20
19
18
17
16
15
14
13
12
11
X2
X2
X2
X2
X2
NC
X1
X1
X1
X1
X1
NC
4
3
2
1
2
3
4
3.3V
5
C1
0.1µF
SCHOTTKY DIODE
BAT54
6
R1
R2
R3
V
= 5.5V
BAT
10k 10k 10k
0
-1
-2
-3
-4
-5
7
V
V
DD
BAT
BATTERY
3.0V
C2
8
V
= 2.7V
DD
60
GND IRQ/F
NC
VDD
SCL
OUT
SCL
0.1µF
9
MCU
INTERFACE
10
V
= 3.3V
NC
SDA
SDA
GND
DD
ISL12020M
IRQ/FOUT
-40
-20
0
20
40
80
TEMPERATURE (°C)
February 11, 2010
FN6667.4
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
1
2
I C Bus™ is a trademark owned by NXP Semiconductors Netherlands, B.V.
Copyright Intersil Americas Inc. 2008, 2009, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.