®
80C286
High Performance Microprocessor
with Memory Management and Protection
March 1997
Features
• Compatible with NMOS 80286
• Wide Range of Clock Rates
Description
The Intersil 80C286 is a static CMOS version of the NMOS
80286 microprocessor. The 80C286 is an advanced, high-
performance microprocessor with specially optimized capa-
bilities for multiple user and multi-tasking systems. The
80C286 has built-in memory protection that supports operat-
ing system and task isolation as well as program and data
privacy within tasks. A 25MHz 80C286 provides up to nine-
teen times the throughput of a standard 5MHz 8086. The
80C286 includes memory management capabilities that
- DC to 25MHz (80C286-25)
- DC to 20MHz (80C286-20)
- DC to 16MHz (80C286-16)
- DC to 12.5MHz (80C286-12)
- DC to 10MHz (80C286-10)
• Static CMOS Design for Low Power Operation
- ICCSB = 5mA Maximum
- ICCOP = 185mA Maximum (80C286-10)
220mA Maximum (80C286-12)
30
map 2 (one gigabyte) of virtual address space per task
24
into 2 bytes (16 megabytes) of physical memory.
260mA Maximum (80C286-16)
310mA Maximum (80C286-20)
410mA Maximum (80C286-25)
• High Performance Processor (Up to 19 Times the 8086
Throughput)
• Large Address Space
• 16 Megabytes Physical/1 Gigabyte Virtual per Task
• Integrated Memory Management, Four-Level Memory
Protection and Support for Virtual Memory and Operat-
ing Systems
• Two 80C86 Upward Compatible Operating Modes
- 80C286 Real Address Mode
The 80C286 is upwardly compatible with 80C86 and 80C88
software (the 80C286 instruction set is a superset of the
80C86/80C88 instruction set). Using the 80C286 real
address mode, the 80C286 is object code compatible with
existing 80C86 and 80C88 software. In protected virtual
address mode, the 80C286 is source code compatible with
80C86 and 80C88 software but may require upgrading to
use virtual address as supported by the 80C286’s integrated
memory management and protection mechanism. Both
modes operate at full 80C286 performance and execute a
superset of the 80C86 and 80C88 instructions.
- PVAM
The 80C286 provides special operations to support the effi-
cient implementation and execution of operating systems.
For example, one instruction can end execution of one task,
save its state, switch to a new task, load its state, and start
execution of the new task. The 80C286 also supports virtual
memory systems by providing a segment-not-present excep-
tion and restartable instructions.
• Compatible with 80287 Numeric Data Co-Processor
• High Bandwidth Bus Interface (25 Megabyte/Sec)
• Available In
- 68 Pin PGA (Commercial, Industrial, and Military)
- 68 Pin PLCC (Commercial and Industrial)
Ordering Information
PACKAGE
TEMP. RANGE
10MHz
12.5MHz
CG80C286-12
IG80C286-12
16MHz
20MHz
25MHz
PKG. NO.
G68.B
o
o
PGA
0 C to +70 C
-
CG80C286-16
CG80C286-20
-
-
-
o
o
-40 C to +85 C IG80C286-10
-
-
-
-
G68.B
o
o
-55 C to +125 C 5962-
5962-
G68.B
9067801MXC
9067802MXC
o
o
PLCC
0 C to +70 C
-
CS80C286-12
IS80C286-12
CS80C286-16
IS80C286-16
CS80C286-20
IS80C286-20
CS80C286-25
-
N68.95
N68.95
o
o
-40 C to +85 C IS80C286-10
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved
FN2947.2
1
All other trademarks mentioned are the property of their respective owners.