SIDE VIEW IRMS6100
TOP VIEW IRMT6100
1.15 Mb/s IrDT Data Transceiver
Preliminary
Dimensions in inches (mm)
C
L
.116
(2.95)
.106
(2.70)
D
E
.157
(4.00)
E
D
.190
(4.83)
PIN 1
PIN 1
E=Emitter
D=Detector
.138 (3.50)
.374 (9.86)
DESCRIPTION
IRMS6100/IRMT6100 is an IrDA compliant 1.152 Mb/s infrared data
transceiver. Its external Shut Down (SD) feature cuts current consump-
tion to typically less than 0.01 µA. The Shut Down (SD) mode disables
the transmit input and tri-states the receiver output with a 500 kΩ pull
up. The transmit input is AC coupled, limiting transmit pulse duration to
70 µs, preventing transmitter damage and continuous LED output which
also provides protection for eye safety.
IRMS6100
IRMT6100
FEATURES
• Fully Compliant with IrDA Specification
• IrDA Data Rates 9.6 Kb/s to 1.152 Mb/s
• High Immunity to Fluorescent Light Noise
• Battery & Power Management Features:
Selectable LED transmit power (Pin 7) makes it easy for designers to
use standard power mode (Pin 7=H) for 1 meter link or low power mode
(Pin7=L) for 20 cm link.
– Receive – 470 µA Typical
Absolute Maximum Ratings, T =25°C (except where noted)
– Shutdown – 10 nA Typical
– Programmable 500 mA/50 mA LED
Transmitter for Standard 1.0 m or Low
Power (30 cm) Operation
– Independent LED Anode Supply – up to
9.0 V DC
A
Supply Voltage Range, all states, V ................................–0.5 to +7.0 V
CC
LED Anode Voltage,
V
=0 to 5.5 V, not transmitting, V
.........................–0.5 to +9.0 V
CC
LEDA
LED Anode Voltage,
V
=2.7 to 5.5 V, transmitting, V
..................... –0.5 to V +4.0 V
CC
CC
LEDA
Input Current,
– Wide Voltage Range 2.7 V to 5.5 V Full
Specification
I
during transmit, V =5.0 V, TxD=V (peak)........................ 20 mA
Output RxD Current....................................................................... 50 mA
CC
CC
CC
– High V Noise Rejection >100 mV
Storage Temperature,
CC
P–P
storage or reduced performance, T ............................. –40 to +100°C
• Shutdown Tri-States Receiver Output and
Disables TxD allowing Bus Interfacing
S
Ambient Temperature, operating, T .....................................–25 to 85°C
A
Lead Solder Temperature, 230°C.....................................................<10 s
• Integrated Protection for Eye Safety—
AC Coupled Transmit Input
IC Junction Temperature, T ...........................................................125°C
J
Average IR LED Current, LED Anode=3.3 V, I
Repetitive Pulsed IR LED Current,
........................ 100 mA
LED
• High DC Ambient Rejection—Operates Outdoors
<10 µs, t <20%, LED Anode=3.3 V, I
Input Voltage: TxD, SD................................................. –0.5 to VCC+0.5 V
RxD Voltage ................................................................ –0.5 to VCC +0.5 V
......................... 600 mA
on
LED(RP)
• Receiver Latency Less <100 µs
• Slimline Package:
H 4.0 mm x D 4.8 mm x L 9.8 mm
Table 1. Pin Functions
Pin no.
Function
IR LEDA
IR LEDC
TxD
Pin no.
Function
1
2
3
4
5
6
7
8
SD
V
CC
LED Power Select
GND
RxD
2001 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA
www.infineon.com/opto • 1-888-Infineon (1-888-463-4636)
4–40
March 22, 2001-15