INA290-Q1
INA290-Q1
www.ti.com
SBOS995A – OCTOBER 2019 – REVISED NOVEMBER 2020
SBOS995A – OCTOBER 2019 – REVISED NOVEMBER 2020
INA290-Q1 AEC-Q100, 2.7-V to 120-V, 1.1-MHz, Ultra-Precise Current Sense Amplifier
1 Features
3 Description
•
AEC-Q100 qualified for automotive applications:
– Temperature grade 1: –40°C to +125°C, TA
Functional Safety-Capable
– Documentation available to aid functional safety
system design
Wide common-mode voltage:
– Operational voltage: 2.7 V to 120 V
– Survival voltage: −20 V to +122 V
Excellent CMRR:
– 160-dB DC
– 85-dB AC at 50 kHz
Accuracy
– Gain:
The INA290-Q1 is an ultra-precise current sense
amplifier that can measure voltage drops across shunt
resistors over a wide common-mode range from 2.7 V
to 120 V. It is in a highly space-efficient SC-70
package with a PCB footprint of only 2.0 mm × 2.1
mm. The ultra-precise current measurement accuracy
is achieved thanks to the combination of an ultra-low
offset voltage of ±12 µV (maximum), a small gain
error of ±0.1% (maximum), and a high DC CMRR of
160 dB (typical). The INA290-Q1 is not only designed
for DC current measurement, but also for high-speed
applications (like fast overcurrent protection, for
example) with a high bandwidth of 1.1 MHz (at gain of
20 V/V) and an 85-dB AC CMRR (at 50 kHz).
•
•
•
•
•
•
Gain error: ±0.1% (maximum)
Gain drift: ±5 ppm/°C (maximum)
The INA290-Q1 provides the capability to make ultra-
precise current measurements by sensing the voltage
drop across a shunt resistor over a wide common-
mode range from 2.7 V to 120 V. The INA290-Q1 is
available in the SC-70 package minimizing solution
size area.
– Offset:
•
•
Offset voltage: ±12 µV (maximum)
Offset drift: ±0.2 µV/°C (maximum)
•
Available gains:
Device Information
– A1 devices: 20 V/V
– A2 devices: 50 V/V
– A3 devices: 100 V/V
– A4 devices: 200 V/V
– A5 devices: 500 V/V
High bandwidth: 1.1 MHz
Slew rate: 2 V/µs
PART NUMBER
PACKAGE(1)
BODY SIZE (NOM)
INA290-Q1
SC-70 (5)
2.00 mm × 1.25 mm
(1) For all available packages, see the package option
addendum at the end of the data sheet.
•
•
•
VS
VBUS
Quiescent current: 370 µA
ISENSE
R1
IN+
+
2 Applications
Current
RSENSE
Bias
Feedback
R1
•
•
•
•
•
Solid-state LiDAR
OUT
œ
INœ
Buffer
Automotive HVAC compressor module
Automotive interior heater module
Automotive parking heater module
Automotive Pumps
ADC
Load
RL
GND
Typical Application
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: INA290-Q1
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1