PRODUCT NEWS BULLETIN
ILC7526/36
USB Dual Power Control Switches
Overcurrent Flags and
seperate enable pins
Applications
Output current to
+3.3V
VCC
500mA with 750mA
fault current limiting
USB Host and self-powered Hubs
10K
10K
+5V
VCC
USB bus-powered Hubs
100K
100K
Hot plug-in power supplies
Battery Charger circuits
USB
+5V
Controller
47uF
D-
USB
Port A
D+
ENA
ON/OFF A
OUTA
IN
GND
Over Current A
Over Current B
FLGA
FLGB
ENB
0.1F
Power Saving Features
<1µA typical off-state supply current
50µA typical on-state supply current
GND
+5V
D-
ON/OFF B
OUTB
47uF
USB
Port B
ILC7526/36
D+
DA-
GND
DA+
DB-
DB+
4
System Advantages
Short-Circuit and Thermal
shutdown protection
Extremely low supply current -
50µA on-state, <1µA off-state
Ultra low RDSON of 140mΩ per switch
500mA continuous load current per
channel
General Description
The ILC7526 contains dual high side power control switches, with
independent enable and flag functions, integrated into a single 8-
Pin SOIC package. With just a few external components, the
ILC7526 can be easily configured to meet requirements for either
self powered or bus powered USB (Universal Serial Bus) applica-
tions. The ILC7526 has active high ENABLE inputs, while the
ILC7536 ENABLE inputs are active low. With maximum RDSON
2 independent switches with Enables
and Flags
2.4V typical undervoltage lockout
1.25A maximum short circuit limit
Soft-start with 1mS turn-on
Over current / over temperature
protection - No external components
value of 140mΩ per switch, the USB voltage drop requirements
can be achieved. Each switch can also supply up to 500mA, with
internal circuitry limiting the fault current to 750mA. Fault condi-
tions are also reported to the USB controller via one of the inde-
pendent flag pins. Internal circuitry provides a soft-start that elim-
inates momentary upstream voltage drops when the switch is
enabled, especially in bus powered applications. Additional fea-
tures include undervoltage lockout (2.4V), fast turn-off, 2.8V to
5.8V input voltage range, thermal shutdown to prevent switch fail-
ure from high current loads, and 3.3V and 5V logic compatible
enable inputs.
USB Specifications complaint
System Options
ILC7526 has active High Enable
ILC7536 has active Low Enable
Package Options
8-Pin SOIC
www.impalalinear.com
5225 Hellyer Ave., Suite 200
San Jose, CA 95138
(408) 574-3939
IMPALA LINEAR CORPORATION