IHLP-5050CE-07
www.vishay.com
Vishay Dale
IHLP® Commercial Inductors, High Saturation Series,
5 % DCR Tolerance
FEATURES
• Lowest height (3.5 mm) in this package footprint
• Shielded construction
• Frequency range up to 5.0 MHz
• Lowest DCR/μH, in this package size
• Handles high transient current spikes without
saturation
• Ultra low buzz noise, due to composite construction
• IHLP design. PATENT(S): www.vishay.com/patents
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESIGN SUPPORT TOOLS click logo to get started
APPLICATIONS
• Tolerance DCR for current sense applications
• Improved current balance in phased power supplies
• Improved thermal management
Models
Design Tools
Available
Available
• PDA / notebook / desktop / server and battery powered
devices
STANDARD ELECTRICAL SPECIFICATIONS
• High current, low profile POL converters
• DC/DC converters in distributed power systems
L0
HEAT
RATING
CURRENT
DC TYP.
(A) (1)
•
DC/DC converter for Field Programmable Gate Array (FPGA)
INDUCTANCE
ꢀ0 % AT 100 kHz,
0.ꢀ5 V, 0 A
(μH)
DCR
5 %
AT ꢀ5 °C
(mΩ)
SATURATION
CURRENT
DC TYP.
DIMENSIONS in inches [millimeters]
(A) (ꢀ)
Typical Pad Layout
0.50ꢁ
0.5ꢁ0
[14.732ꢀ
0.60
0.68
1.0
1.5
2.2
3.3
4.7
5.6
10
1.85
2.34
29
28
24
19
16
12
10
9.5
7
51
49
40
35
29
27
24
19
14
[12.9ꢀ
ꢂaꢃ.
0.195
[4.95ꢀ
3.21
0.325
0.13ꢁ
[3.5ꢀ ꢂaꢃ.
[ꢁ.255ꢀ
0.091 0.01
[2.3 0.3ꢀ
4.97
7.20
0.1ꢁ5 0.01
[4.7 0.3ꢀ
10.69
14.27
18.19
30.86
The diagram applies to
values 0.6 µH and below.
0.520 0.015
[13.2 0.3ꢁꢀ ꢂaꢃ.
Typical Pad Layout
0.50ꢁ
[12.9ꢀ
ꢂaꢃ.
0.575
[14.605ꢀ
Notes
•
•
•
All test data is referenced to 25 °C ambient
Operating temperature range -55 °C to +125 °C
The part temperature (ambient + temp. rise) should not exceed
125 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application
0.12ꢁ [3.3ꢀ
0.325
[ꢁ.255ꢀ
0.13ꢁ
[3.5ꢀ ꢂaꢃ.
0.0ꢁ7 0.01
[2.2 0.254ꢀ
0.11ꢁ 0.01
[3.0 0.3ꢀ
•
Rated operating voltage (across inductor) = 75 V
DC current (A) that will cause an approximate ΔT of 40 °C
DC current (A) that will cause L0 to drop approximately 20 %
(1)
(2)
The diagram applies to
values 0.6ꢁ µH and above.
0.520 0.015
[13.2 0.3ꢁꢀ
DESCRIPTION
1.0 μH
IHLP-5050CE-07
ꢀ0 %
INDUCTANCE TOLERANCE
ER
e3
MODEL
INDUCTANCE VALUE
PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
I
H
L
P
5
0
5
0
C
E
E
R
1
R
0
M
0
7
PACKAGE
CODE
INDUCTANCE
VALUE
PRODUCT FAMILY
SIZE
TOL.
SERIES
PATENT(S): www.vishay.com/patents
This Vishay product is protected by one or more United States and international patents.
Revision: 14-Jul-17
Document Number: 34166
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000