PC Card Socket Connector Complies with PC card Standard
IC1 Series
ꢀFeatures
1. Compliant with PC Card Standards
Polarized entry prevents wrong insertion into a
corresponding connector. And sequential
contact engagement prevents electorostatic
discharge,avoiding possible damage to sensitive
board circuits.
2. Suited to Automatic Mounting
Packaged for a board placement with aoutmated
equipment.
3. Lead Offset
Available with several board termination
levels,to allow use of different height board
components.
In relation to the center line of connector,-
0.2mm,+0.3mm,+0.55mm,+0.9mm and
terminations on board center are available.
ꢀProduct Specifications
Current rating 0.5 A
Operating temperature
Operating humidity
-55ç to +85ç (Note 1)
95% R.H. max.
Storage temperature
Storage humidity
-40ç to +70ç (Note 2)
Ratings
Voltage rating 125 V AC
40% to 70% (Note 2)
(No condensation)
Item
Specification
Conditions
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
1000M ohms min.
500 V DC
No flashover or insulation breakdown.
500 V AC / 1 minute
1 mA
40 m ohms max. (initial value) (Note 3)
No electrical discontinuity of 100ns or
more
Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or
acceleration of 147 m/s (peak), 4 hours in each of the 3 directions.
4. Vibration
2
5. Humidity (Steady state) Insulation resistance: 100 M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
-55ç, 30 min /15 to 30ç, within 5 min/85ç, 30 min
/15 to 35ç, within 5 min, for 5 cycles
6. Temperature cycle
No damage, cracks, or parts looseness.
Change of contact resistance from the
start should be 20 m ohms max.
7. Durability
(Insertion/withdrawal)
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
8. Resistance to
soldering heat
No deformation of components
affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
ꢀMaterials
Part
Material
PPS
Finish
Remarks
UL94V-0
Insulator
Color : Black
IC1K,IC1HA:Phosphor bronze Contact Area : gold plating
Others:Beryllium copper Lead Area : solder plating
Contact
-----------------
A52