HVC-8800
SMPTE 2022-5,6 Video-over-IP PCIe Card
Features
Preliminary
SMPTE 2022-6 Video over IP bridge that converts 3G-SDI x3 to 10G Ethernet
Forward Error Correction (FEC) supported according to SMPTE 2022-5
Send or receive raw video through PCIe interface to host computer
Single configurable module allows operating as a transmitter or receiver
Single slot, half length PCIe x8 card (only x4 used in logical)
Low operating power consumption ( <15 Watt)
Introduction
HVC-8800 is a single slot, Half-Length PCIe add-on card in terms of performing encapsulation/decapsulation multiple High-Definition 1080p60 video streams over a 10 gigabit Ethernet
network in uncompressed format. HVC-8800 supports the approved SMPTE 2022-6 (High Bit Rate Media Transport over IP Networks) standard for transmitting and receiving video
raw data through IP networks via RTP protocol. The SMPTE 2022-5 (Forward Error Correction for High Bit Rate Real-Time Video/Audio Transport over IP) feature is also supported by
HVC-8800 to improve resilience of bit errors and packet loss during video data transmission. HVC-8800 can be operated either as a transmitter or receiver function, by configuring
the selection jumper onboard. The transmitter mode will take the video raw data from multiple SDI inputs or PCI Express interface and converts the video content into the packet format
defined by SMPTE 2022 before transmitting out through 10 gigabit Ethernet port. The receiver mode will perform very similar process like transmitter mode but in reversed way of
datapath. It is also doable in using HVC-8800 as the standalone board without the need for plugging into a host system for operation. With the easy-to-use software development
kit (SDK), HVC-8800 is an ideal solution for broadcasters or system integrators who need to carry the uncompromised video data through the existing IP infrastructure. The wide
range of target applications that HVC-8800 can serve includes cloud video acquisition, video over IP bridge, real-time video transfer and networked broadcast studio installations.
Specification
Dimension
Unit: mm
Channels
3
SD-SDI SMPTE 259-C
HD-SDI SMPTE 292
3G-SDI Level A SMPTE 425-A
PAL/NTSC/SMPTE 274/SMPTE 296/
SMPTE 260/SMPTE 2048-2/
SMPTE 428-9/SMPTE 428-19/
SMPTE 372
SDI Interfaces
167.65
21.59
Video Input
(Tx Mode)
Video Output
(Rx Mode)
Video Standards
Resolution
Max. Frame Rate
Connectors
Up to 1920 x 1080p (Full HD 1080p)
Up to 60 fps per channel
SMA
PCIe Gen2 x4
File-based I/O
(Physical link is PCIe Gen2 x8, reserved for future upgrade)
Function Standards
SMPTE 2022-5/6
10G Ethernet
Interfaces
Forward Error
Correction
Level A and Level B FEC
(steam basis)
Connectors
SFP+ Module
Giga Ethernet
Interfaces
10/100/1000 Mbps LAN port; RJ-45 connector
(This interface is reserved for future upgrade)
Latency
60 ms (3G-SDI, 1080/60p)
Internet Protocol Support IPV4 static IP setting
Power
Ordering Information
Under 15 Watt
Consumption
Part Number
Description
HVC-8800-TXE
SMPTE-2022 Encapsulation PCIe Card
All product specifications are subject to change without notice
Last updated : 5-Aug-2015