HV5522/HV5530
HV5622/HV5630
32-Channel Serial To Parallel Converter
With Open Drain Outputs
Ordering Information
Package Options
Device
Recommended
Operating VPP max
44 J-Lead Quad
Ceramic Chip Carrier Plastic Chip Carrier
44 J-Lead Quad
44 Lead Quad
Plastic Gullwing
Die
HV5522
HV5530
HV5622
HV5630
220V
300V
220V
300V
HV5522DJ
HV5530DJ
HV5622DJ
HV5630DJ
HV5522PJ
HV5530PJ
HV5622PJ
HV5630PJ
HV5522PG
HV5530PG
HV5622PG
HV5630PG
HV5522X
HV5530X
HV5622X
HV5630X
Features
General Description
❏
❏
❏
❏
❏
❏
❏
❏
❏
Processed with HVCMOS® technology
The HV55 and HV56 are low-voltage serial to high-voltage
parallel converters with open drain outputs. These devices have
been designed for use as drivers for AC-electroluminescent
displays. They can also be used in any application requiring
multiple output high voltage current sinking capabilities such as
drivinginkjetandelectrostaticprintheads,plasmapanels,vacuum
fluorescent, or large matrix LCD displays.
Sink current minimum 100mA
Shift register speed 8MHz
Polarity and Blanking inputs
CMOS compatible inputs
Forward and reverse shifting options
Diode to VPP allows efficient power recovery
44-lead ceramic surface mount package
Hi-Rel processing available
These devices consist of a 32-bit shift register, 32 latches, and
control logic to perform the polarity select and blanking of the
outputs. Dataisshiftedthroughtheshiftregisteronthehightolow
transition of the clock. The HV55 shifts in the counterclockwise
direction when viewed from the top of the package, and the HV56
shifts in the clockwise direction. A data output buffer is provided
for cascading devices. This output reflects the current status of
the last bit of the shift register. Operation of the shift register is not
affected by the LE (latch enable), BL (blanking), or the POL
(polarity)inputs. Transferofdatafromtheshiftregistertothelatch
occurs when the LE (latch enable) input is high. The data in the
latch is stored when LE is low.
Absolute Maximum Ratings
Supply voltage, VDD
1
-0.5V to +15V
1
Output voltage, VPP
HV5530/HV5630
-0.5V to +315V
-0.5V to +230V
-0.5V to VDD + 0.5V
1.5A
HV5522/HV5622
Logic input levels1
Ground current2
Continuous total power dissipation3 Ceramic
Plastic
1500mW
1200mW
Operating temperature range
Ceramic -55°C to +125°C
Plastic -40°C to +85°C
Storage temperature range
-65°C to +150°C
260°C
Lead temperature 1.6mm (1/16 inch)
from case for 10 seconds
Notes:
1. All voltages are referenced to VSS
.
2. Duty cycle is limited by the total power dissipated in the package.
3. For operation above 25°C ambient derate linearly to maximum operating
temperature at 20°C for plastic and at 15mW/°C for ceramic.
12/13/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
1
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.