APPLICABLE STANDARD
-25 C TO +85 C
-10
C TO +60 C
OPERATING
STORAGE TEMPERATURE
RANGE
RATING
TEMPERATURE RANGE
VOLTAGE
AC 30 V , DC 42 V
1 A
CURRENT
APPLICABLE CABLE
φ5
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
X
X
X
X
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
MARKING
ELECTRIC CHARACTERISTICS
X
X
X
X
30
m MAX.
M MIN.
CONTACT RESISTANCE
CONTACT SHALL BE MEASURED AT DC
1
A
1000
INSULATION RESISTANCE
100
100
V DC.
X
X
VOLTAGE PROOF
V AC. FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
0 .003
CONTACT INSERTION AND
INSERTION AND WITHDRAWAL FORCES : 0.1 N MIN.
INSERTION AND WITHDRAWAL FORCES
BY STEEL GAUGE.
0 .291
X
X
0
-
-
WITHDRAWAL FORCES
CONNECTOR INSERTION AND
WITHDRAWAL FORCES
MEASURED BY APPLICABLE CONNECTOR.
LOCKING DEVICE WITH UNLOCK
LOCKING DEVICE WITH LOCK
: 25 N MAX.
- N MAX.
m MAX.
:
CONTACT RESISTANCE:
50
MECHANICAL OPERATION
VIBRATION
1000 TIMES INSERTIONS AND EXTRACTIONS.
X
X
-
-
①NO ELECTRICAL DISCONTINUITY OF 10 s.
②NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
FREQUENCY: 10 TO 55 Hz,SINGLE AMPLITUDE 0.75 mm,
m/s2 AT 2h, FOR 3 DIRECTIONS.
SHOCK
490 m/s2 DIRECTIONS OF PULSE 11 ms AT 3 TIMES
FOR 3 DIRECTIONS.
X
X
-
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 ℃, 90 TO 95 %, 96 h.
① INSULATION RESISTANCE: 5 MΩ MIN
(AT HIGH HUMIDITY).
(STEADY STATE)
② INSULATION RESISTANCE: 50 MΩ MIN
(AT DRY).
③ NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
① INSULATION RESISTANCE: 1000 MΩ MIN..
② NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
RAPID CHANGE OF TEMPERATURE TEMPERATURE -55→ R/T(1) → +85 → R/T ℃
TIME 30 → 10 TO 15 → 30 → 10 TO 15 min
UNDER 5 CYCLES.
X
-
EXPOSED IN 5 SALT WATER SPRAY FOR 48 h.
EXPOSED AT + 85 ℃,96 h.
CORROSION SALT MIST
DRY HEAT
NO HEAVY CORROSION RUIN THE FUNCTION.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
X
-
-
COLD
EXPOSED AT - 55 ℃,96 h.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
X
-
-
RESISTANCE TO SOLDERING
HEAT
SOLDER TEMPERATURE, + 380±10℃, FOR SOLDERING
+1
DURATION, 3 0 s.
NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS
OF THE TERMINALS.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE, + 350±10℃ FOR
WETTING ON SOLDER SURFACE,NO SOLDER CLUSTER.
X
-
SOLDERING DURATION, 2 TO 3 s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
EJ.KUNII
EJ.KUNII
MM.ISHII
15.10.14
15.10.14
15.10.14
NOTE (1) R/T:ROOM TEMPERATURE
DRAWN
MM.ISHII
15.10.14
Unless otherwise specified, refer to IEC 60512(JIS C 5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-110373-72-00
HR25-7TJ-4S(72)
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
CL125-0013-7-72
△
FORM HD0011-2-1