Product Data Sheet
3.0 WATT
MINIATURE SIP DC/DC CONVERTER
HPR2XX
FEATURES
!
High Isolation Voltage: 750V Continuous
Input-to-Output and Channel-to-Channel
!
!
!
Four Channels Of Isolated Power
High Output Power Density: > 9. 4 Watts/Inch3
!
!
Single In-line Package (SIP)
Extended Temperature Range:
-25°C To +85°C
Internal Input and Output Filtering
!
!
High Efficiency: To 84%
Low Cost
!
Non-Conductive Case
frequencies, or "aliasing" in multiple channel applications.
TheHPR2XXSeriesisdesignedformultiplechannelapplications
that require small size and could benefit from a complete one-
package solution. The HPR2XX Series offers four isolated
channels of output power in a footprint less than the size of many
singular devices. This unregulated series of DC/DC converters
provides three watts of total output power. Each isolated channel
can supply up to 750mW.
The high efficiency of the HPR2XX Series means less internal
power dissipation than comparable solutions. With reduced heat
to dissipate, the HPR2XX Series can operate at higher
temperatures with no degradation in reliablility. In addition, the
high efficiency of the HPR2XX Series provides greater than 9
watts/inch3 output power density.
The HPR2XX Series uses advanced circuit design and packaging
technology to realize superior reliability and performance. With
only one switching converter on the board, the HPR2XX
eliminates the possibility of separate converters creating beat
The HPR2XX Series offers the user low cost without sacrificing
reliability. Theuseofsurfacemounteddevicesandmanufacturing
technologiesmakeit possibletoofferpremiumperformanceand
low cost.
MECHANICAL
PINCONNECTIONS
2.210+.010
(56.13)
1. -VOUT1 5.-VOUT2
9. +VIN 14. -VOUT3 18. -VOUT4
10.-VIN 15. COM3 19. COM 4
+VOUT1 7.+VOUT2 16. +VOUT3 20. +VOUT4
TOP
2. COM 1 6. COM2
0.340+.010
(8.64)
VIEW
3
0.340+.010
(8.64)
RIGHT
SIDE
FRONT
VIEW
0.400+.010
(10.16)
VIEW
0.030+.010
(0.76)
0.140+.020
(0.25)
0.010+.002
(0.25)
0.050+.015
(1.27)
0.020+.002
(0.51)
0.155+.015
(3.94)
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: 0.015ꢀ
BOTTOM
VIEW
Marked with: specific model ordered, date code, and job code.
1
2
3
5
6
7
9
10
14 15 16
18 19 20
Internet: http://www.cdpowerelectronics.com
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 800.547.2537 Fax: 520.770.9369
Power Electronics Division, Europe
C&D Technologies (Power Electronics) Ltd.
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Tel: +353.61.474.133 Fax:+353.61.474.141
HPR2XX REV D 4/99
Page 1
This Material Copyrighted by Its Respective Manufacturer