Datasheet > HIP6004D

HIP6004D

更新时间： 2024-02-02 01:09:20

品牌	Logo	应用领域
英特矽尔 - INTERSIL		监视器控制器
页数	文件大小	规格书
11页	205K
描述
Buck and Synchronous-Rectifier PWM Controller and Output Voltage Monitor

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

HIP6004D 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	SOIC, TSSOP	包装说明：	TSSOP, TSSOP20,.25
针数：	20, 20	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.73	模拟集成电路 - 其他类型：	SWITCHING CONTROLLER
控制模式：	VOLTAGE-MODE	控制技术：	PULSE WIDTH MODULATION
最大输入电压：	13.2 V	最小输入电压：	10.8 V
标称输入电压：	12 V	JESD-30 代码：	R-PDSO-G20
JESD-609代码：	e3	长度：	6.5 mm
湿度敏感等级：	3	功能数量：	1
端子数量：	20	最高工作温度：	70 °C
最低工作温度：		封装主体材料：	PLASTIC/EPOXY
封装代码：	TSSOP	封装等效代码：	TSSOP20,.25
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：	260	认证状态：	Not Qualified
座面最大高度：	1.2 mm	子类别：	Switching Regulator or Controllers
表面贴装：	YES	切换器配置：	PUSH-PULL
最大切换频率：	1000 kHz	温度等级：	COMMERCIAL
端子面层：	Matte Tin (Sn) - annealed	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	40	宽度：	4.4 mm
Base Number Matches：	1

HIP6004D 数据手册

HIP6004D

Data Sheet

April 2000

File Number 4855

Buck and Synchronous-Rectiﬁer (PWM)

Controller and Output Voltage Monitor

Features

• Drives Two N-Channel MOSFETs

• Operates from +5V or +12V Input

The HIP6004D provides complete control and protection for

a DC-DC converter optimized for high-performance

microprocessor applications. It is designed to drive two

N-Channel MOSFETs in a synchronous-rectiﬁed buck

topology. The HIP6004D integrates all of the control, output

adjustment, monitoring and protection functions into a single

package.

• Simple Single-Loop Control Design

- Voltage-Mode PWM Control

• Fast Transient Response

- High-Bandwidth Error Ampliﬁer

- Full 0% to 100% Duty Ratio

The output voltage of the converter is easily adjusted and

precisely regulated. The HIP6004D includes a fully TTL-

compatible 5-input digital-to-analog converter (DAC) that

• Excellent Output Voltage Regulation

- ±1% Over Line Voltage and Temperature

• TTL-Compatible 5-Bit Digital-to-Analog Output

Voltage Selection

adjusts the output voltage from 1.1V

to 1.85V

in 25mV

increments steps. The precision reference and voltage-mode

regulator hold the selected output voltage to within ±1% over

temperature and line voltage variations.

- 25mV Binary Steps . . . . . . . . . 1.100V

to 1.850V

• Power-Good Output Voltage Monitor

The HIP6004D provides simple, single feedback loop,

voltage-mode control with fast transient response. It includes

a 200kHz free-running triangle-wave oscillator that is

adjustable from below 50kHz to over 1MHz. The error

ampliﬁer features a 15MHz gain-bandwidth product and

6V/µs slew rate which enables high converter bandwidth for

fast transient performance. The resulting PWM duty ratio

ranges from 0% to 100%.

• Over-Voltage and Over-Current Fault Monitors

- Does Not Require Extra Current Sensing Element,

Uses MOSFET’s r

DS(ON)

• Small Converter Size

- Constant Frequency Operation

- 200kHz Free-Running Oscillator Programmable from

50kHz to over 1MHz

The HIP6004D monitors the output voltage with a window

comparator that tracks the DAC output and issues a Power

Good signal when the output is within ±10%. The HIP6004D

protects against over-current and overvoltage conditions by

inhibiting PWM operation. Additional built-in overvoltage

protection triggers an external SCR to crowbar the input

supply. The HIP6004D monitors the current by using the

Applications

• Power Supply for K7™, and Other Microprocessors

•

High-Power DC-DC Regulators

Low-Voltage Distributed Power Supplies

Pinout

of the upper MOSFET which eliminates the need for

DS(ON)

HIP6004D

(SOIC)

a current sensing resistor.

TOP VIEW

Ordering Information

VSEN

OCSET

OVP

VCC

TEMP.

PKG.

NO.

PART NUMBER RANGE ( C)

PACKAGE

20 Ld SOIC

VID0

17 LGATE

16 PGND

HIP6004DCB

0 to 70

M20.3

VID1

NOTE: When ordering, use the entire part number. Add the sufﬁx T

to obtain the part in tape and reel, e.g., HIP6004DCB-T.

VID2

BOOT

VID3

14 UGATE

13 PHASE

VID4

COMP

PGOOD

FB 10

11 GND

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

K7™ is a trademark of Advanced Micro Devices, Inc.

12 3 4 5 6 7...11

中文翻译

下载PDF

与HIP6004D相关器件

型号	品牌	描述	获取价格	数据表
HIP6004D_05	INTERSIL	Buck and Synchronous-Rectifier (PWM) Controller and Output Voltage Monitor	获取价格
HIP6004DCB	INTERSIL	Buck and Synchronous-Rectifier PWM Controller and Output Voltage Monitor	获取价格
HIP6004DCB	RENESAS	SWITCHING CONTROLLER, 1000kHz SWITCHING FREQ-MAX, PDSO20, PLASTIC, MS-013AC, SOIC-20	获取价格
HIP6004DCB-T	RENESAS	SWITCHING CONTROLLER, 1000kHz SWITCHING FREQ-MAX, PDSO20, PLASTIC, MS-013AC, SOIC-20	获取价格
HIP6004DCBZ	INTERSIL	Buck and Synchronous-Rectifier (PWM) Controller and Output Voltage Monitor	获取价格
HIP6004DCBZ	RENESAS	Buck and Synchronous-Rectifier (PWM) Controller and Output Voltage Monitor HIP6004D; SOIC2	获取价格
HIP6004DCBZ-T	RENESAS	Buck and Synchronous-Rectifier (PWM) Controller and Output Voltage Monitor HIP6004D; SOIC2	获取价格
HIP6004DCR	INTERSIL	Buck and Synchronous-Rectifier (PWM) Controller and Output Voltage Monitor	获取价格
HIP6004DCR	RENESAS	SWITCHING CONTROLLER, 1000kHz SWITCHING FREQ-MAX, PQCC20, 5 X 5 MM, PLASTIC, MO-220VHHC, Q	获取价格
HIP6004DCR-T	RENESAS	SWITCHING CONTROLLER, 1000kHz SWITCHING FREQ-MAX, PQCC20, 5 X 5 MM, PLASTIC, MO-220VHHC, Q	获取价格

与HIP6004D相关文章

晶闸管阳极与阴极之间加电压时控制极的电流流动分析
2024-06-05

2
探究MOS管沟道夹断后载流子传输机制及其电路设计影响
2024-06-05

4
光敏电阻的工作原理、作用及检测方法
2024-06-05

3
ENC28J60以太网控制器全面解析：特性、应用、引脚说明
2024-06-05

2

产品中心

服务支持

精选活动

关于我们

帮助中心

HIP6004D

HIP6004D 技术参数

HIP6004D 数据手册

与HIP6004D相关器件

与HIP6004D相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

HIP6004D

HIP6004D 技术参数

HIP6004D 数据手册

与HIP6004D相关器件

与HIP6004D相关文章

您还可以找

您在本页遇到什么问题？