HIP4081A
®
Data Sheet
J uly 2004
FN3659.7
80V/2.5A Peak, High Frequency Full
Bridge FET Driver
Features
• Independently Drives 4 N-Channel FET in Half Bridge or
Full Bridge Configurations
The HIP4081A is a high frequency, medium voltage Full
Bridge N-Channel FET driver IC, available in 20 lead plastic
SOIC and DIP packages. The HIP4081A can drive every
possible switch combination except those which would
cause a shoot-through condition. The HIP4081A can switch
at frequencies up to 1MHz and is well suited to driving Voice
Coil Motors, high-frequency switching power amplifiers, and
power supplies.
• Bootstrap Supply Max Voltage to 95VDC
• Drives 1000pF Load at 1MHz in Free Air at 50°C with Rise
and Fall Times of Typically 10ns
• User-Programmable Dead Time
• On-Chip Charge-Pump and Bootstrap Upper Bias
Supplies
For example, the HIP4081A can drive medium voltage brush
motors, and two HIP4081As can be used to drive high
performance stepper motors, since the short minimum
“on-time” can provide fine micro-stepping capability.
• DIS (Disable) Overrides Input Control
• Input Logic Thresholds Compatible with 5V to 15V Logic
Levels
• Very Low Power Consumption
• Undervoltage Protection
• Pb-free Available
Short propagation delays of approximately 55ns maximizes
control loop crossover frequencies and dead-times which
can be adjusted to near zero to minimize distortion, resulting
in rapid, precise control of the driven load.
Applications
A similar part, the HIP4080A, includes an on-chip input
comparator to create a PWM signal from an external triangle
wave and to facilitate “hysteresis mode” switching.
• Medium/Large Voice Coil Motors
• Full Bridge Power Supplies
• Switching Power Amplifiers
• High Performance Motor Controls
• Noise Cancellation Systems
• Battery Powered Vehicles
• Peripherals
The Application Note for the HIP4081A is the AN9405.
Ordering Information
PART
NUMBER
TEMP RANGE
(°C)
PKG.
DWG. #
PACKAGE
20 Ld PDIP
HIP4081AIP
-40 to 85
-40 to 85
E20.3
E20.3
HIP4081AIPZ
(Note)
20 Ld PDIP
(Pb-free)
• U.P.S.
HIP4081AIB
-40 to 85
-40 to 85
20 Ld SOIC (W) M20.3
HIP4081AIBZ
(Note)
20 Ld SOIC (W) M20.3
(Pb-free)
Pinout
HIP4081A
(PDIP, SOIC)
TOP VIEW
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
1
2
BHO
BHS
BLO
BLS
20
19
18
17
16
15
14
13
12
11
BHB
BHI
DIS
3
V
4
SS
BLI
ALI
V
5
DD
V
6
CC
ALS
ALO
AHI
7
HDEL
LDEL
AHB
8
AHS
AHO
9
10
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Harris Corporation. Copyright Intersil Americas Inc. 2003, 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.