HILCONNECTOR
3.3mm pitch/Crimp style Wire-to-wire connectors
Specifications –––––––––––––––––––
• Current rating: 5A AC, DC (2 circuits AWG #18)
• Voltage rating: 300V AC, DC
-
+
• Temperature range: 25˚C to 85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,500V AC/minute
• Applicable wire: Conductor size/01 type AWG #24 to #20
/21 type AWG #22 to #18
Insulation O.D./01 type 1.3 to 2.5mm
/21 type 1.5 to 2.7mm
(when using retainer for 21 type 1.5 to 2.5mm)
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
This HIL connector is 3.3mm pitch wire-to-
wire connector that has a mechanism to
prevent an incomplete mating when mating
connector.
Note: The current rating varies depending on the number of circuits and the wire
size used in each connector. The table below lists the current rating as a
function of the number of circuits and the wire size.
Current unit: A
Wire size (AWG)
Circuits
#18
#20
#22
#24
• Inertia lock mechanism to prevent an
incomplete mating
• Box-shaped contact to prevent the influence
by external forces
• Polarizing key to prevent connector from
mating with incorrect circuits
4
4
3
3
3
2
3
4
6
8
5
4
3
3
3
3
3
2
2
2
3
2
2
2
2
Assembly layout
List of combinations
Resin color
(Plug/
Receptacle)
<2, 3 circuits>
Natural
Red
Blue
Polarizing key
pattern
Polarizing key
pattern 1
Polarizing key
pattern 2
Polarizing key
pattern 3
(34.6) Including retainer
(31.6)
<4, 6, 8 circuits>
(34.6) Including retainer
(31.6)
Plug
Model No.
HILP-( )V-1-S
HILP-( )V-2-R
HILP-( )V-3-E
Receptacle
Model No.
HILR-( )VF-1-S
HILR-( )VF-2-R
HILR-( )VF-3-E
1