The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ribbon Cable connector Compliant with MIL Standard
HIF3B Series
■Features
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MIL
standard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-
insertion as follows.
1 The system provides the convex area to insert the guide-key on the
pin header side, and to guide it in combination with the socket
convex area (MIL standard).
2
The system embeds and guides the polarizing key in the socket holes.
4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./
0.127mm, jacket dia. 0.9 0.1mm).
■Product Specifications
(
)
(
)
Current rating : 1A
Operating Temperature Range
:
–55 to +85ç Note 1 Storage Temperature Range : –10 to +60ç Note 2
Rating
(
)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% Note 2
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min.
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
0.1A
3. Contact Resistance
4. Vibration
15m ohms max.
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes ■■15 to 35ç: 5 minutes max.
125ç: 30 minutes ■ 15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle No damage, cracks, or parts looseness.
7. Durability (Mating/un-mating) Contact resistance: 15m ohms max.
Flow: 260ç for 10 seconds
8. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Part
Material
PBT
Finish
Black
Remarks
UL94V-0
Insulator
Connection area
Connection area
Connection area
Connection area
Gold plated
Gold plated
D
Beryllium copper
Socket Contact
–––––––
–––––––
Gold plated
DA
Copper alloy
Brass
Tin lead plated
Pin header contact
Selective Gold plated
B15