HI-5042 thru HI-5051
TM
Data Sheet
April 2000
File Number 3127.4
CMOS Analog Switches
Features
This family of CMOS analog switches offers low resistance
switching performance for analog voltages up to the supply
rails and for signal currents up to 80mA. “ON” resistance is
low and stays reasonably constant over the full range of
• Wide Analog Signal Range . . . . . . . . . . . . . . . . . . . ±15V
• Low “ON” Resistance . . . . . . . . . . . . . . . . . . . . . . . . . 25Ω
• High Current Capability . . . . . . . . . . . . . . . . . . . . . . 80mA
operating signal voltage and current. r
remains
ON
• Break-Before-Make Switching
exceptionally constant for input voltages between +5V and
-5V and currents up to 50mA. Switch impedance also
changes very little over temperature, particularly between
- Turn-On Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370ns
- Turn-Off Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 280ns
o
o
• No Latch-Up
0 C and 75 C. r
is nominally 25Ω for HI-5049 and
ON
HI-5051 and 50Ω for HI-5042 through HI-5047.
• Input MOS Gates are Protected from Electrostatic
Discharge
All devices provide break-before-make switching and are
TTL and CMOS compatible for maximum application
versatility. Performance is further enhanced by Dielectric
Isolation processing which insures latch-free operation with
• DTL, TTL, CMOS, PMOS Compatible
Applications
o
very low input and output leakage currents (0.8nA at 25 C).
• High Frequency Switching
• Sample and Hold
This family of switches also features very low power
operation (1.5mW at 25 C).
o
There are 7 devices in this switch series which are
• Digital Filters
differentiated by type of switch action and value of r
(see
ON
• Operational Amplifier Gain Switching
Functional Description Table). The HI-504X and HI-505X
series switches can directly replace IH-5040 series devices,
and are functionally compatible with the DG180 and DG190
family.
Functional Diagram
S
Ordering Information
A
N
P
PART
NUMBER
TEMP. RANGE
o
( C)
PACKAGE
16 Ld CERDIP
16 Ld CERDIP
16 Ld CERDIP
16 Ld PDIP
PKG. NO.
F16.3
D
HI1-5042-2
HI1-5043-2
HI1-5043-5
HI3-5043-5
HI9P5043-5
HI1-5047-5
HI1-5049-5
HI1-5051-2
HI1-5051-5
HI3-5051-5
HI9P5051-9
-55 to 125
-55 to 125
0 to 75
F16.3
F16.3
0 to 75
E16.3
M16.15
F16.3
Functional Description
0 to 75
16 Ld SOIC
PART NUMBER
TYPE
r
ON
0 to 75
16 Ld CERDIP
16 Ld CERDIP
16 Ld CERDIP
16 Ld CERDIP
16 Ld PDIP
HI-5042
SPDT
50Ω
50Ω
50Ω
25Ω
25Ω
0 to 75
F16.3
HI-5043
HI-5047
HI-5049
HI-5051
Dual SPDT
4PST
-55 to 125
0 to 75
F16.3
F16.3
Dual DPST
Dual SPDT
0 to 75
E16.3
M16.15
-40 to 85
16 Ld SOIC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Corporation. | Copyright © Intersil Corporation 2000
1