FACTSHEET F-200 SUPPLEMENT
HCSD–12–S–03–01–T
HCMD, HCMS
HCSD, HCSS
.10 0" IDC CABLE STRIPS
OTHER
OPTIONS
ASSEMBLED
LENGTH
PLATING
OPTION
NOTCH
POLARIZATION
01
–“XX”
–N
= Assembled Length
= Notch Polarization
10µ" (0,25µm) Gold on contact
area or tail, 150µ" (3,81µm)
Tin on balance
(Standard on HCSS & HCSD.
Leave blank)
02
(1,27)
.050
Assembled Length in
INCHES (±1/8")
2 inches minimum
=
–S
–T
01
(3,81) .150
150µ" (3,81µm) Tin
(Standard on HCMS & HCMD.
Leave blank)
Required for HCSS and HCSD.
(Not available on HCMS or HCMD, unless
Transfer, then only the socket is polarized.)
=
–P “XX”
–S “XX”
–ST “X”
–R
= Position Polarization
= Daisy Chain Single
= Stripped & Tinned
= Reversed
(50,80)
Specify Suffix from table. All
2.00
“XX”± 1/8" (3,18)
1
dimensions are ± /16" (1,59mm). Not
min.
available in 28 positions and higher.
Single Row
Connectors
01
02
04
01
03
02
03
Outer Most
(End of
Assembly)
04
(101,60)
4.00 minimum
7
When mating double row connector
with two single row connectors, the
outer most single will be connected
to Conductor #1 and the inside single
to Conductor #2.
1/8" (3,18)
1/4" (6,35)
1/2" (12,70)
3/8" (9,53)
–ST8
–ST4
Single
Double
–M
–ST2
= Middle Reversed
–ST3
6
Specify “XX” as position. For
Double the same position will be
polarized on both ends. (Not
3
–D “XX”
= Daisy Chain, Double
available on HCM, unless Transfer,
then only the socket is polarized)
–B “XX”
= Breakout
(50,80)
2.00
min.
“XX” ± 1/8" (3,18)
Specify “XX” as number of
conducts to be broken out.
Double Row
Strips
Requires –SXX, –WXX or –DXX
7
Outer Most
(End of
1
–O
“XX”
Assembly)
= Outside Reversed
(101,60)
4.00 minimum
(127,00)
–G
6
5.00 max.
(50,80)
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
= Gray Cable
2.00 min.
4
–W “XX”
= Wiring Reversed
Daisy Chain, Single
Standard cable is color coded. Specify
–G for Gray cable with one red edge.
–RW
Same as –S “XX” except outer strip
= Reversed Wiring
connected to conductor #2 and inside
strip connected to conductor #1.
Requires –SXX, –WXX or –DXX
#1 wire opposite position #1
2
7
6
5
SAMTEC USA • Tel: 1-800-SAMTEC-9 or 812-944-6733 • Fax: 812-948-5047
SAMTEC GERMANY • Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
SAMTEC UK • Tel: 01236 739292 • Fax: 01236 727113
SAMTEC FRANCE • Tel: 01 60 95 06 60 • Fax: 01 60 95 06 61
SAMTEC ASIA PACIFIC • Tel: 65-745-5955 • Fax: 65-841-1502
SAMTEC ITALY • Tel: 39 039 6890337 • Fax: 39 039 6890315
SAMTEC TAIWAN • Tel: (02) 2395-1677 • Fax: (02) 2395-1689
SAMTEC JAPAN • Tel: 81-424-42-8318 • Fax: 81-424-42-8319
SAMTEC CHINA • Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047
Due to technical progress, all designs, specifications and components are subject to change without notice.