HJ
HJ RELAYS
ACCESSORIES
(Sockets and DIN rail
terminal sockets)
TYPES
Type
No. of poles
2-pole
Product name
Part No.
HC2-SS-K-H105
HC4-SS-K-H105
HC2-PS-K-H105
HC4-PS-K-H105
HJ2-SFD
HC2-socket (for HJ relay)
Plug-in socket
2/4-pole (common)
2-pole
HC4-socket (for HJ relay)
HC2-PC board socket (for HJ relay)
HC4-PC board socket (for HJ relay)
HJ2 terminal socket
PC board socket
2/4-pole (common)
2-pole
HJ2 terminal socket (Finger protect type)
HJ4 terminal socket
HJ2-SFD-S
DIN rail terminal socket
HJ4-SFD
2/4-pole (common)
HJ4 terminal socket (Finger protect type)
HJ4-SFD-S
Standard packing: Carton: 10 pcs.; Case: 100 pcs.
Notes: 1. Use the hold-down clip that is shipped with the terminal socket or socket.
2. DIN rail terminal sockets conform to UL/C-UL and TÜV, as standard. Sockets conform to UL and CSA, as standard.
3. In order to prevent breakage and disfiguring, the screw tightening torque for the terminal socket should be within the range of 0.49 to 0.69 N·m (5 to 7 kgf·cm).
4. When attaching directly to a chassis, please use an M4 × 10 metric coarse screw thread, a spring washer, and a hexagonal nut.
5. For S1DX/S1DXM timer, use the leaf holding clip (Part No. ADX18012).
6. HC relay sockets/terminal sockets are not adaptive for HJ relays. Use dedicated sockets/terminal sockets.
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e
DIMENSIONS (mm inch)
1. Plug-in socket
HC2 - Socket for HJ relay (HC2-SS-K-H105)
HC4 - Socket for HJ relay (HC4-SS-K-H105)
CAD Data
CAD Data
External dimensions
External dimensions
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.06
4.06
1
5
2
6
3
7
4
8
1
5
2
6
3
7
4
8
.160
6.35
.250
6.35
.250
.160
6.35
.250
6.35
.250
29.4
29.4
1.157
1.157
9
10 11 12
14
9
10 11 12
14
7.06
.278
7.06
.278
25.2
.992
25.2
.992
13
13
1.27
.050
1.27
.050
2.3
.091
2.3
.091
25.5
1.004
25.5
1.004
16.55
.652
16.55
.652
21.2
.835
21.2
.835
7.65
.301
7.65
.301
Tolerance: 0.3 .012
Tolerance: 0.3 .012
Mounting hole diagram
With a relay mounted
(HC2-SS-K-H105)
Chassis cutout (Side-by-side installation)
25.8
1.016
8.9
.350
25.8
1.016
21.6
.850
21.6
.850
5.9
.232
Hold-down clip is packaged with the socket.
(Same product as plug-in socket (Part No.:
HC2-SS-K) for HC relay except that hold-down
clip shape is different.)
Tolerance: 0.2 .008
Notes: 1. Applicable chassis board thickness is 1.0 to
2.0 mm.
2. Installation is easy by inserting the socket
from the top into the holes and by
depressing the two down arrows on the
retention fitting from the front.
ASCTB260E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e