HA-2539
Data Sheet
September 1998
File Number 2896.3
600MHz, Very High Slew Rate
Features
Operational Amplifier
• Very High Slew Rate . . . . . . . . . . . . . . . . . . . . . . 600V/µs
The Intersil HA-2539 represents the ultimate in high slew
rate, wideband, monolithic operational amplifiers. It has been
designed and constructed with the Intersil High Frequency
Bipolar Dielectric Isolation process and features dynamic
parameters never before available from a truly differential
device.
• Open Loop Gain. . . . . . . . . . . . . . . . . . . . . . . . . . 15kV/V
• Wide Gain-Bandwidth (A ≥ 10). . . . . . . . . . . . . . 600MHz
V
• Power Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . 9.5MHz
• Low Offset Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mV
• Input Voltage Noise . . . . . . . . . . . . . . . . . . . . . . 6nV/√Hz
• Output Voltage Swing. . . . . . . . . . . . . . . . . . . . . . . . ±10V
• Monolithic Bipolar Dielectric Construction
With a 600V/µs slew rate and a 600MHz gain bandwidth
product, the HA-2539 is ideally suited for use in video and
RF amplifier designs, in closed loop gains of 10 or greater.
Full ±10V swing coupled with outstanding AC parameters
and complemented by high open loop gain makes the
devices useful in high speed data acquisition systems.
Applications
• Pulse and Video Amplifiers
• Wideband Amplifiers
• High Speed Sample-Hold Circuits
• RF Oscillators
For further design assistance please refer to Application Note
AN541 (Using the HA-2539 Very High Slew Rate Wideband
Operational Amplifiers) and Application Note AN556 (Thermal
Safe-Operating-Areas For High Current Operational Amplifiers.
For military grade product information, the HA-2539/883 data
sheet is available upon request.
Pinout
HA-2539
(PDIP, CERDIP)
TOP VIEW
Ordering Information
TEMP.
o
PART NUMBER RANGE ( C)
PACKAGE
PKG. NO.
+IN
NC
V-
1
2
3
4
5
6
7
14 -IN
13 NC
12 NC
11 NC
10 +V
-
+
HA1-2539-2
HA1-2539-5
HA3-2539-5
-55 to 125
0 to 75
14 Ld CERDIP F14.3
14 Ld CERDIP F14.3
0 to 75
14 Ld PDIP
E14.3
NC
NC
NC
NC
9
8
NC
OUTPUT
NOTE: No-Connection (NC) leads may be tied to a ground plane
for better isolation and heat dissipation.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1