Absolute encoders - parallel
Shaft with clamping or synchro flange
Singleturn encoder, capped gray code
GXA1W - parallel
Features
– Encoder singleturn / parallel
– Optical sensing
– Clamping flange or synchro flange
– Encoder with capped gray code
– Short-circuit proof push-pull outputs
– Output release by enable signal
GXA1W with clamping flange
Technical data - electrical ratings
Technical data - mechanical design
Voltage supply
10...30 VDC
Housing
Shaft
ø58 mm
Reverse polarity protection Yes
ø10 mm (clamping flange)
ø6 mm (synchro flange)
Consumption w/o load
Initializing time (typ.)
Interface
≤60 mA (24 VDC)
Flange
Clamping or synchro flange
20 ms after power on
12 parallel outputs
2880
Protection DIN EN 60529 IP 54 without shaft seal
IP 65 with shaft seal
Steps per turn
Absolute accuracy
Sensing method
Code
Operating speed
≤10000 rpm (mechanical)
≤6000 rpm (electric)
±0.05°
Optical
Starting torque
≤0.015 Nm IP 54
≤0.03 Nm IP 65
Gray excess
Rotor moment of inertia
Admitted shaft load
14.5 gcm²
Code sequence
Inputs
CW/CCW coded by connection
≤20 N axial
≤40 N radial
UP/DOWN
ENABLE
STORE
Materials
Housing: aluminium
Flange: aluminium
Output circuit
Push-pull short-circuit proof
DIN EN 61000-6-2
Operating temperature
-25...+85 °C
-40...+85 °C (optional)
Interference immunity
Emitted interference
Approval
DIN EN 61000-6-4
Relative humidity
Resistance
95 % non-condensing
UL approval / E63076
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
Weight approx.
E-connection
250 g
Connector, 16-pin
www.baumerivo.com
1