APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40 C TO 105 C (NOTE1)
-40 C TO 105 C
CURRENT
VOLTAGE
250 V AC
1
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
CONFIRMED VISUALLY.
×
×
×
×
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
1A DC.
SIGNAL: 30 mΩ MAX . SHIELD 60 mΩ MAX .
SIGNAL: 30 mΩ MAX . SHIELD 60 mΩ MAX .
×
×
-
-
20 mV AC MAX, 0.1 mA(DC OR 1000Hz)
×
×
-
-
500 V DC
100 MΩ MIN.
VOLTAGE PROOF
650 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND BY STEEL GAUGE,
EXTRACTION FORCES
.
INSERTION FORCE - N MAX.
EXTRACTION FORCE - N MIN.
① CONTACT RESISTANCE: 60 m MAX.
SHIELD 120 mΩ MAX .
-
×
-
-
MECHANICAL OPERATION
30 TIMES INSERTIONS AND EXTRACTIONS.
②
×
×
×
-
-
-
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
VIBRATION
FREQUENCY 20 TO 200 Hz,
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE: 60 m MAX.
SHIELD 120 mΩ MAX .
43.1 m/s2 AT 3 h FOR
3 DIRECTIONS.
③
×
×
×
-
-
-
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
SHOCK
FREQUENCY 20 TO 50 Hz,
66.6 m/s2 AT 1 h .
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② CONTACT RESISTANCE:
SIGNAL: 60 m MAX, SHIELD 120 mΩ MAX .
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
×
×
×
-
-
-
LOCK STRENGTH
APPLYING A PULL FORCE THE MATING
AXIALLY AT 98N MAX.
① DURING APPLYING,MATING COMPLETELY.
②
AFTER APPLYING,NO DEFECT OF MATING PARTS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
① CONTACT RESISTANCE:
EXPOSED AT 60 C, 90 ~ 95 %, 500 h.
×
-
(STEADY STATE)
SIGNAL: 60 m MAX, SHIELD 120 mΩ MAX .
② INSULATION RESISTANCE:100 M MIN.
×
×
×
-
-
-
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
RAPID CHANGE OF
TEMPERATURE
① CONTACT RESISTANCE:
TEMPERATURE-40→5 TO 35→ 85→5 TO 35C
SIGNAL: 60 m MAX, SHIELD 120 mΩ MAX .
TIME
30 →
5 → 30 → 5 min
② INSULATION RESISTANCE:100 M MIN.
UNDER 1000 CYCLES.
×
×
×
-
-
-
③
NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
DRY HEAT
EXPOSED AT 105C, 300 h.
① CONTACT RESISTANCE:
SIGNAL: 60 m MAX, SHIELD 120 mΩ MAX .
② NO HEAVY CORROSION.
① CONTACT RESISTANCE:
SIGNAL: 60 m MAX, SHIELD 120 mΩ MAX .
② NO HEAVY CORROSION.
① CONTACT RESISTANCE:
×
×
×
-
-
-
COLD
EXPOSED AT -40C , 300 h.
CORROSION, SALT MIST
EXPOSED IN 5% SALT WATER SPRAY FOR
96 h.
-
-
SIGNAL: 60 m MAX, SHIELD 120 mΩ MAX .
② NO HEAVY CORROSION.
① CONTACT RESISTANCE:
×
×
-
-
RESISTANCE TO HSO3 GAS EXPOSED IN 500 PPM FOR 8h.
SIGNAL: 60 m MAX, SHIELD 120 mΩ MAX .
② NO HEAVY CORROSION.
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
RESISTANCE TO
SOLDERING HEAT
SOLDER TEMPERATURE, 260 C FOR
2 TIMES
×
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KI.HIROKAWA
EJ.WAKATSUKI
TS.KUBOTA
20200331
20200330
20200325
20200313
(NOTE1)
INCLUDE THE TEMPERATURE RISING BY CURRENT.
APPLIVCABLE PCB THICKNESS: 1.6+/-0.2 mm.
(NOTE2)
YK.MITSUISHI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
ELC-167010-65-00
DRAWING NO.
PART NO.
CODE NO.
GT17HN-4DP-2H(B)(65)
SPECIFICATION SHEET
0
△
1/1
HIROSE ELECTRIC CO., LTD.
CL767-0175-0-65
FORM HD0011-2-1