GS8342T07/10/19/37BD-450/400/350/333/300
36Mb SigmaDDR-II+TM
Burst of 2 SRAM
450 MHz–300 MHz
165-Bump BGA
Commercial Temp
Industrial Temp
1.8 V V
DD
1.8 V or 1.5 V I/O
The GS8342T07/10/19/37BD SigmaDDR-II+ SRAMs are just
one element in a family of low power, low voltage HSTL I/O
SRAMs designed to operate at the speeds needed to implement
economical high performance networking systems.
Features
• 2.0 Clock Latency
• Simultaneous Read and Write SigmaDDR™ Interface
• Common I/O bus
• JEDEC-standard pinout and package
• Double Data Rate interface
• Byte Write controls sampled at data-in time
• Burst of 2 Read and Write
• On-Die Termination (ODT) on Data (D), Byte Write (BW),
and Clock (K, K) inputs
• 1.8 V +100/–100 mV core power supply
• 1.5 V or 1.8 V HSTL Interface
Clocking and Addressing Schemes
The GS8342T07/10/19/37BD SigmaDDR-II+ SRAMs are
synchronous devices. They employ two input register clock
inputs, K and K. K and K are independent single-ended clock
inputs, not differential inputs to a single differential clock input
buffer.
• Pipelined read operation with self-timed Late Write
• Fully coherent read and write pipelines
• ZQ pin for programmable output drive strength
• Data Valid pin (QVLD) Support
• IEEE 1149.1 JTAG-compliant Boundary Scan
• 165-bump, 13 mm x 15 mm, 1 mm bump pitch BGA package
• RoHS-compliant 165-bump BGA package available
Each internal read and write operation in a SigmaDDR-II+ B2
RAM is two times wider than the device I/O bus. An input data
bus de-multiplexer is used to accumulate incoming data before
it is simultaneously written to the memory array. An output
data multiplexer is used to capture the data produced from a
single memory array read and then route it to the appropriate
output drivers as needed. Therefore the address field of a
SigmaDDR-II+ B2 RAM is always one address pin less than
the advertised index depth (e.g., the 4M x 8 has a 2M
addressable index).
SigmaDDR™ Family Overview
The GS8342T07/10/19/37BD are built in compliance with the
SigmaDDR-II+ SRAM pinout standard for Common I/O
synchronous SRAMs. They are 37,748,736 (36Mb) SRAMs.
Parameter Synopsis
-450
-400
2.5 ns
0.45 ns
-350
2.86 ns
0.45 ns
-333
-300
tKHKH
tKHQV
2.22 ns
0.45 ns
3.0 ns
0.45 ns
3.3 ns
0.45 ns
Rev: 1.02 6/2012
1/29
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.