5 ~ 6W AC-DC Single Output Wall-mounted type
GS06U series
Features :
Universal AC input / Full range
No load power consumption <0.3W
ErP step2 compliant
Meet EISA 2007 (Energy Independence and Security Act)
2 pole USA plug
Class power (without earth pin)
Protections: Short circuit / Overload / Over voltage
Pass LPS
Fully enclosed plastic case
Approvals: UL / CUL / CB / FCC / CE
2 years warranty
SPECIFICATION
ORDER NO.
GS06U-1P1J GS06U-11P1J GS06U-2P1J GS06U-3P1J GS06U-4P1J GS06U-5P1J GS06U-6P1J GS06U-8P1J
SAFETY MODEL NO.
GPSU06U-1
Note.2 5V
GPSU06U-1-1 GPSU06U-2
GPSU06U-3
12V
GPSU06U-4
15V
GPSU06U-5
18V
GPSU06U-6
24V
GPSU06U-8
48V
DC VOLTAGE
7.5V
9V
RATED CURRENT
CURRENT RANGE
RATED POWER
1.00A
0 ~ 1.00A
5W
0.8A
0.66A
0 ~ 0.66A
6W
0.5A
0.4A
0.33A
0.25A
0.125A
0 ~ 0.8A
6W
0 ~ 0.5A
6W
0 ~ 0.4A
6W
0 ~ 0.33A
6W
0 ~ 0.25A
6W
0 ~ 0.125A
6W
RIPPLE & NOISE (max.) Note.3 50mVp-p
80mVp-p
6 ~ 8V
80mVp-p
8 ~ 11V
100mVp-p
11 ~ 13V
120mVp-p
13 ~ 16V
150mVp-p
16 ~ 21V
180mVp-p
21 ~ 27V
200mVp-p
33 ~ 48V
OUTPUT
5 ~ 6V
VOLTAGE ADJ. RANGE
Fixed
VOLTAGE TOLERANCE Note.4 5.0%
5.0%
0.5%
5.0%
5.0%
0.5%
5.0%
3.0%
0.5%
3.0%
3.0%
0.5%
3.0%
3.0%
0.5%
3.0%
2.0%
0.5%
2.0%
2.0%
0.5%
2.0%
LINE REGULATION
LOAD REGULATION
Note.5 0.5%
Note.6 5.0%
SETUP, RISE, HOLD UP TIME 1000ms, 50ms, 12ms at full load
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz
FREQUENCY RANGE
EFFICIENCY (Typ.)
Note.7 68%
74%
75%
77%
78%
78%
82%
84%
INPUT
AC CURRENT
0.2A / 100VAC
50A / 230VAC
INRUSH CURRENT (max.)
LEAKAGE CURRENT(max.)
0.25mA / 240VAC
>105% rated output voltage power for 5V ; >110% rated output power for 7.5 ~ 48V
OVERLOAD
Protection type : Hiccup mode, recovers automatically after fault condition is removed
>120% rated output voltage
PROTECTION
OVER VOLTAGE
Protection type : Clamp by zener diode
0 ~ +40 (Refer to "Derating Curve")
WORKING TEMP.
20% ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-20 ~ +85 , 10 ~ 95% RH
ENVIRONMENT
0.03% / (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, CSA22.2 approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
I/P-O/P:4242VDC
SAFETY &
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022, EN61000-3-2,3, FCC part 15 Class B
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
EMC
(Note. 8)
500Khrs min. MIL-HDBK-217F(25
32*66*42.5mm (L*W*H)
)
OTHERS
DIMENSION
100g ; 110pcs / 12Kg / CARTON
PACKING
PLUG
Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type center positive for stock ; Other type available by customer requested
Standard type 20Awg UL1185 6ft for stock ; Other type available by customer requested
CONNECTOR
CABLE
NOTE
1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 0% to 100% rated load
7.Efficiency is measured at 115VAC.
8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives.
File Name:GS06U-SPEC 2011-06-14