Preliminary GR8935
Current Mode PWM Power Switch
Features
Description
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Current mode PWM
GR8935 integrates a PWM controller and high
voltage power MOSFET of 650V. GR8935 has the
features of very low startup current and current
mode PWM control with green-mode function at
light load. These features enable the power supply
to easily meet even the strictest power conservation
requirements. The integrated functions of GR8935
also include the leading-edge blanking of the current
sensing, internal slope compensation, cycle-by-
-cycle peak current limiting and soft start. OCP,
OVP and OLP provide protection performance for
fault conditions. To protect the power MOSFET from
being damaged by supply over voltage, the internal
gate voltage of GR8935 is clamped at 18V.
GR8935 improves the performance and reduces the
cost of power supplies.
Very low startup current
Under-voltage lockout (UVLO)
Non-audible-noise green-mode control
Fixed switching frequency of 50KHz
Cycle-by-cycle peak current limiting
Internal leading-edge blanking
Internal slope compensation
Internal 5ms soft start
VCC over voltage clamp
Over-voltage protection (OVP) on VCC Pin
Over-load protection (OLP)
Applications
ꢀ
ꢀ
ꢀ
ꢀ
Switching AC/DC power battery charger
Digital camera
Open-frame SMPS
PDA power supply
Ordering and Marking Information
DIP-8
Grenergy OPTO Inc. reserves the right to make changes to improve reliability or manufacture ability without
notice, and advise customers to obtain the latest version of relevant information to verify before placing
orders.
2010.07 Ver. 1E Copyright Grenergy OPTO, Inc. www.grenergy-ic.com
1