5秒后页面跳转
GPM80-48 PDF预览

GPM80-48

更新时间: 2024-11-21 12:25:35
品牌 Logo 应用领域
SLPOWER /
页数 文件大小 规格书
2页 332K
描述
80 Watt Global Single and Multiple Output Performance Switchers

GPM80-48 技术参数

生命周期:Obsolete包装说明:,
Reach Compliance Code:unknown风险等级:5.84
其他特性:REMOTE SHUTDOWN模拟集成电路 - 其他类型:AC-DC REGULATED POWER SUPPLY MODULE
认证:CE, TUV, UL效率(主输出):70%
高度:47.24 mm最大输入电压:264 V
最小输入电压:85 V长度:177.8 mm
最高工作温度:50 °C最低工作温度:
最大输出电流:2.3 A标称输出电压:48 V
保护:OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE纹波电压(主输出):0.16968 Vrms
子类别:Power Supply Modules最大总功率输出:80 W
宽度:107.95 mmBase Number Matches:1

GPM80-48 数据手册

 浏览型号GPM80-48的Datasheet PDF文件第2页 
GPC80 Commercial/GPM80 Medical  
80 Watt Global Single and Multiple Output Performance Switchers  
PERFORMANCE MEDICAL SWITCHERS  
FEATURES:  
• Wide-range ac input 85-264 Vac  
• 2-year warranty  
• Conducted EMI exceeds FCC Class B and CISPR 22  
Class B (Commercial models) and CISPR 11 Class B  
(Medical models)  
• Commercial Approved to UL1950, IEC950, EN60950 and  
CSA22.2-234 L3  
• Medical Approved to UL2601-1, IEC601-1 and CSA22.2  
No. 601.1  
• Complies with EN61000-3-2 Class A  
• RoHS Compliant Model Available (G suffix)  
SPECIFICATIONS  
Ac Input  
Output Noise  
85-264 Vac, 47-63 Hz single phase.  
0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential mode. Measured with noise  
probe directly across output terminals of the power supply.  
Input Current  
Maximum input current at 120 Vac, 60 Hz with full rated output load: 2.3 A  
Transient Response  
Main output—500 μs typical response time for return to within 0.5% of final value  
for a 50% load step change. ∆i/∆t<0.2 A/μs. Maximum voltage deviation is 3.5%.  
Startup/shutdown overshoot less than 3%.  
Hold-Up Time  
20 ms minimum from loss of ac input at full load, nominal line (115 Vac).  
Output Power  
Remote Sense  
Provided as a standard feature on single-output models.  
80 W continuous, 110 W with air flow. Peak ratings are for 60 s maximum  
duration, 10% duty cycle. During peak load condition, output regulation may  
exceed total regulation limits.  
Voltage Adjustment  
Built-in potentiometer adjusts voltage 5% on outputs 1 ꢀ 2.  
Overload Protection  
Fully protected against short circuit and output overload. Short circuit protec-  
tion is cycling type power limit on outputs 1 ꢀ 2; foldback type on outputs 3  
ꢀ 4. Recovery after fault is automatic. Factory set to begin power limiting at  
120 W. See output ratings chart for additional notes or conditions.  
EMI/EMC Compliance  
All models include built-in EMI filtering to meet the following emissions  
requirements:  
EMI SPECIFICATIONS  
COMPLIANCE LEVEL  
Overvoltage Protection  
Main outputs: 124% 12% typical.  
Conducted Emissions GPC80  
Conducted Emissions GPM80  
Static Discharge  
RF Field Susceptibility  
Fast Transients/Bursts  
Surge Susceptibility  
EN55022 Class B; FCC Class B  
EN55011Class B; FCC Class B  
EN61000-4-2, 6 kV contact, 8 kV air  
EN61000-4-3, 3 V/meter  
EN61000-4-4, 2 kV, 5 kHz  
EN61000-4-5, 1 kV diff., 2 kV com.  
EN61000-3-2 Class A  
Efficiency  
70% at full rated load, nominal input voltage, depending on model and load  
distribution.  
Input Protection  
Line Frequency Harmonics  
Internal ac fuse provided. Designed to blow only if a catastrophic failure oc-  
curs in the unit.  
Commercial Leakage Current  
0.7 mA 254 Vac @ 60 Hz input.  
Inrush Current  
Inrush is limited by internal thermistors. Inrush at 240 Vac under cold start  
conditions will not exceed 34 A.  
Commercial Safety  
Approved to UL1950, CSA22.2 No. 234 Level 3, IEC950 and EN60950. UL file  
#E135803 commercial; CSA #LR46516 all. The output(s) are intended for safety  
earthed Signal Output and Intermediate Circuits only. All dc outputs are SELV  
under normal and single fault conditions.  
Temperature Coefficient  
0.03%/°C typical on all outputs.  
Environmental  
Medical Leakage Current  
35 μA 254 Vac @ 60 Hz input.  
Designed for 0 to 50°C operation at full rated output power; derate output  
current and total output power by 2.5% per °C above 50°C. See Environmen-  
tal and Packaging Specifications on next page.  
Medical Commercial Safety  
Approved to UL2601-1, CSA-C22.2 No. 601.1 Level 3 and IEC601.1. UL file E116994;  
CSA #LR46516. The output(s) are intended for safety earthed Signal Output and  
Intermediate Circuits only. The output(s) are not acceptable for patient connection  
without additional isolation. All dc outputs are SELV under normal and  
single fault conditions.  
Power Fail (optional)  
TTL- or CMOS-compatible output goes low (< 0.5 V) 5 ms before output  
voltage drops more than 4% below nominal voltage upon loss of ac power.  
The signal is factory set to trip on 84 to 94 Vac brown-out depending upon  
incoming line impedance and distortion. Other settings are available to the  
user through adjustment of built-in potentiometer (consult factory for as-  
sistance). For Power fail option, add -PF after model number.  
All specifications are typical at nominal input, full load at 25OC unless otherwise stated  

与GPM80-48相关器件

型号 品牌 获取价格 描述 数据表
GPM80-48G SLPOWER

获取价格

AC-DC Regulated Power Supply Module, 80W
GPM80-5 SLPOWER

获取价格

80 Watt Global Single and Multiple Output Performance Switchers
GPM80-5G SLPOWER

获取价格

AC-DC Regulated Power Supply Module, 80W,
GPM80A SLPOWER

获取价格

80 Watt Global Single and Multiple Output Performance Switchers
GPM80AG SLPOWER

获取价格

AC-DC Regulated Power Supply Module, 80W
GPM80B SLPOWER

获取价格

80 Watt Global Single and Multiple Output Performance Switchers
GPM80C SLPOWER

获取价格

80 Watt Global Single and Multiple Output Performance Switchers
GPM80CG SLPOWER

获取价格

AC-DC Regulated Power Supply Module, 80W
GPM80D SLPOWER

获取价格

80 Watt Global Single and Multiple Output Performance Switchers
GPM80E SLPOWER

获取价格

80 Watt Global Single and Multiple Output Performance Switchers