GLS85VM1016B / 1032B / 1064B
Industrial Temp eMMC NANDrive™
Fact sheet 03.000
March 2017
Features
Industry Standard Embedded MultiMediaCard
Expanded Data Protection
Hardware Write Protection pin
Latency Management
(eMMC) Host Interface
-
-
JEDEC/MMC Standard Version 4.4
JESD84-A44 compliant
-
Reduce latencies due to background operation
-
Backward compatible with eMMC 4.3
during time critical read/write operations
Performance
Integrated Voltage Detector
-
-
-
eMMC clock speed: Up to 52MHz (Support
x1/x4/x8 bus and Dual Data Rate mode)
Sequential data read:
Up to 70 MByte/sec *
Sequential data write:
-
Detects supply voltage fluctuations and
generates reset during power-up and power-
down to prevent inadvertent writes
Robust Built-in ECC
NAND Configuration
Up to 39 MByte/sec *
* measured using 128 Kbyte transfer size
-
2 bits per cell (MLC)
Temperature Range
Industrial: -40°C to 85°C
100-ball LBGA Package
Power Management
-
-
-
-
3.3V power supply
3.3V or 1.8V eMMC IO voltage
Immediate disabling of unused circuitry without
host intervention
-
14.0 mm x 18.0 mm x 1.40 mm,
1.0 mm ball pitch, LFWE
All Devices are RoHS Compliant
Power Specifications
-
Active mode:
265mA typical (GLS85VM1064B)
235mA typical (GLS85VM1032B)
190mA typical (GLS85VM1016B)
Sleep mode:
-
200µA typical
Product Description
The GLS85VM1016B / VM1032B / VM1064B eMMC
NANDrive™ devices (referred to as “eMMC
NANDrive” in this datasheet) are fully integrated solid
state drives. They combine an advanced Greenliant
NAND controller and 16, 32 or 64 GByte of NAND
flash memory in a multi-chip package. These products
are ideal for solid state mass storage in embedded
and portable applications that require small form-
factor, energy efficient and reliable data storage.
The integrated NAND flash controller with built-in
advanced
NAND
management
firmware
communicates with the host through the standard
eMMC protocol. It does not require any additional or
proprietary software such as the Flash File System
(FFS) and Memory Technology Driver (MTD).
eMMC NANDrive’s advanced NAND management
technology enhances data security, improves
endurance and accurately tracks the usage of the
NAND flash. This innovative technology combines
robust error correction capabilities with advanced
wear-leveling algorithms and bad block management
to extend the life of the product.
eMMC solid state drives are widely used in GPS and
telematics, in-vehicle infotainment, portable and
industrial computers, handheld data collection
scanners, point-of-sale terminals, networking and
telecommunications equipment, robotics, audio and
video recorders, monitoring devices and set-top boxes.
eMMC NANDrive supports Dual Data Rate (DDR)
mode, boot, multiple partitions, permanent and partial
write protect, Replay Protected Memory Block (RPMB)
access, Secure erase and TRIM, hardware reset and
other features detailed in the eMMC 4.4 standard
specification. It is fully backward compatible with the
eMMC 4.3 standard.
eMMC NANDrive provides complete eMMC solid state
drive (SSD) functionality and compatibility in a 14mm
x 18mm BGA package for easy, space saving
mounting to a system motherboard. With its small size,
low power consumption, strong security, reliability and
ruggedness, eMMC NANDrive surpasses removable
storage and discrete NAND-based products.
These specifications are subject to change without notice.
© 2017 Greenliant Systems
3/9/2017
S71449-F
1
GLS FS0019 Rev. 00