5秒后页面跳转
捷配首页

Datasheet > GCJ43
GCJ43 PDF预览

GCJ43

更新时间： 2024-11-23 12:46:19
品牌 Logo 应用领域
村田 - MURATA 测试
页数 文件大小 规格书
4页 47K
描述
Medium Voltage for Automotive Soft Termination Type GCJ Series Specifications and Test Methods

阅读下载

中文翻译

获取价格

GCJ43 数据手册

 浏览型号GCJ43的Datasheet PDF文件第2页浏览型号GCJ43的Datasheet PDF文件第3页浏览型号GCJ43的Datasheet PDF文件第4页 
Medium Voltage for Automotive Soft Termination Type GCJ Series Specifications and Test Methods  
AEC-Q200  
Test Item  
No.  
1
Specifications  
AEC-Q200 Test Method  
Pre- and Post-Stress  
Electrical Test  
–
High Temperature  
The measured and observed characteristics should satisfy the  
Exposure (Storage) specifications in the following table.  
Appearance No marking defects  
Capacitance  
Within ±10%  
Change  
Set the capacitor for 1000±12 hours at 150±3°C. Let sit for  
24±2 hours at room temperature, then measure.  
2
D.F.  
I.R.  
0.05 max.  
More than 10,000MΩ or 100MΩ · µF  
(Whichever is smaller)  
Temperature  
Cycle  
The measured and observed characteristics should satisfy the  
specifications in the following table.  
Fix the capacitor to the supporting jig in the same manner and  
under the same conditions as (19). Perform the 1000 cycles  
according to the 4 heat treatments listed in the following table.  
Let sit for 24±2 hours at room temperature, then measure.  
Appearance No marking defects  
Capacitance  
Change  
Step  
1
2
3
4
Within ±10%  
3
4
Temp. (°C) -55+0/-3 Room Temp. 125+3/-0 Room Temp.  
Time (min.) 15±3  
1
15±3  
1
D.F.  
I.R.  
0.025 max.  
•Pretreatment  
More than 10,000MΩ or 100MΩ · µF  
(Whichever is smaller)  
Perform the heat treatment at 150+0/-10°C for 60±5 minutes  
and then let sit for 24±2 hours at room temperature.  
Destructive  
Physical Analysis  
No defects or abnormalities  
Per EIA-469  
Moisture  
Resistance  
The measured and observed characteristics should satisfy the  
specifications in the following table.  
Apply the 24-hour heat (25 to 65°C) and humidity (80 to 98%)  
treatment shown below, 10 consecutive times.  
Let sit for 24±2 hours at room temperature, then measure.  
Appearance No marking defects  
Humidity Humidity Humidity Humidity Humidity  
Capacitance  
Change  
°C  
Within ±12.5%  
90-98% 80-98% 90-98% 80-98%  
90-98%  
70  
65  
60  
55  
50  
45  
40  
35  
30  
25  
20  
15  
10  
5
D.F.  
I.R.  
0.05 max.  
5
+10  
-2  
°C  
Initial measurement  
More than 10,000MΩ or 100MΩ · µF  
(Whichever is smaller)  
0
-5  
-10  
One cycle = 24 hours  
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24  
Hours  
The measured and observed characteristics should satisfy the  
specifications in the following table.  
Biased Humidity  
Apply the rated voltage and DC1.3+0.2/-0V (add 6.8kΩ  
resistor) at 85±3°C and 80 to 85% humidity for 1000±12 hours.  
Remove and let sit for 24±2 hours at room temperature, then  
measure.  
The charge/discharge current is less than 50mA.  
•Pretreatment  
Appearance No marking defects  
Capacitance  
Within ±12.5%  
Change  
6
D.F.  
I.R.  
0.05 max.  
Perform the heat treatment at 150+0/-10°C for 60±5 minutes  
and then let sit for 24±2 hours at room temperature.  
More than 1,000MΩ or 10MΩ · µF  
(Whichever is smaller)  
The measured and observed characteristics should satisfy the  
specifications in the following table.  
Apply voltage as in the Table for 1000±12 hours at 125±3°C.  
Let sit for 24±2 hours at room temperature, then measure.  
The charge/discharge current is less than 50mA.  
Operational Life  
Appearance No marking defects  
Rated Voltage  
DC250V  
DC630V  
Applied Voltage  
150% of the rated voltage  
120% of the rated voltage  
Capacitance  
Change  
7
Within ±12.5%  
D.F.  
I.R.  
0.05 max.  
•Pretreatment  
Apply test voltage for 60±5 minutes at test temperature.  
Remove and let sit for 24±2 hours at room temperature.  
More than 1,000MΩ or 10MΩ · µF  
(Whichever is smaller)  
8
9
External Visual  
No defects or abnormalities  
Visual inspection  
Physical Dimension Within the specified dimensions  
Using calipers and micrometers  
Continued on the following page.  
1234

中文翻译

下载PDF

与GCJ43相关器件

型号 品牌 获取价格 描述 数据表
GCJ4335C5C0JR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ4335C5C1AR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ4335C5C1CR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ4335C5C2WR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ4337U5C0JR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ4337U5C1AR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ4337U5C1CR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ4337U5C2WR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ433C75C0JR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors
GCJ433C75C1AR50D MURATA

获取价格

 		Chip Monolithic Ceramic Capacitors

与GCJ43相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证