GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER
VOLTAGE RANGE
50 to 1000 Volts
35.0 Ampere
GBPC35005/W THRU GBPC3510/W
CURRENT
FEATURES
GBPC35W
GBPC35
1.135(28.8)
·
·
Plastic package has UL flammability classification 94V-0
1.135(28.8)
1.115(28.3)
1.115(28.3)
0.72(17.1)
.632(16.1)
Integrally molded heatsink provides very low thermal
resistance for maximum heat dissipation
High forward surge capacity
.470(11.0)
.430(10.9)
AC
AC
+
·
·
·
·
+
.582(14.8)
.542(13.8)
1.135(28.8)
1.115(28.3)
.672(17.1)
1.135(28.8)
1.115(28.3)
.732(18.6)
.592(17.6)
.632(16.1)
Glass passivated chip junction
-
High isolation voltage from case to lugs
High temperature soldering guaranteed:
260℃/10 seconds,
AC
-
AC
.732(18.6)
.692(17.6)
.732(18.6)
.692(17.6)
0.094(2.4)DIA.
.042(1.07)
.038(.97)
.25(6.35)
·
A vailable in either lug package (GBPC35005)
or wire lead package (GBPC35005W)
0.034(.86)
0.030(.76)
1.25
(31.8)
MIN.
.840(21.3)
.740(18.8)
0.310(7.87)
0.290(7.36)
.310(7.87)
.290(7.36)
MECHANICAL DATA
.220(5.59)
·
Case:Epoxy, Molded Plastic with integrally mounted heatsink
Terminals: Plated 0.25”(6.35mm) lug or
METAL HEAT SINK
.220(5.59)
.100(5.08)
0.200(5.08)
METAL HEAT SINK
HOLE FOR
#10 SCREW
·
HOLE FOR
#10 SCREW
plated 0.040” (1.02mm) diameter lead
Dimensions in inches and (millimeters)
·
·
·
Polarity: Polarity symbols market on case
Mounting: Thru hole for #10 screw, 20 in-lbs Torque max. See Note 3
Weight: 0.53 ounce, 15.0 gram-GBPC35 and GBPC35-W
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
·
·
·
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
GBPC GBPC GBPC GBPC GBPC GBPC GBPC
SYMBOLS
UNIT
35005/W 3501/W
3502/W
3504/W
3506/W
3508/W
3510/W
1000
700
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
400
600
800
Volts
Volts
Volts
140
280
420
560
Maximum DC Blocking Voltage
100
200
400
600
800
1000
Maximum Average Forward Rectified Current
(SEE FIG.1) at TC=55℃
I(AV)
35
Amps
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
IFSM
300
Amps
I2t
660
1.1
A2s
Rating for Fusing (t<8.3ms)
Maximum Instantaneous Forward Voltage drop
Per Bridge element 17.5A
VF
Volts
TA = 25℃
5.0
500
2500
300
1.4
Maximum DC Reverse Current at
rated DC blocking Voltage per element
IR
µA
TA = 125℃
Isolation Voltage from case to lug or lead
VISO
Cj
Volts
pF
Typical Junction Capacitance per leg (NOTE 1)
Typical Thermal Resistance per leg (NOTE 2)
Operating Junction Temperature
Storage Temperature Range
RΘJC
TJ
TSTG
℃/W
℃
(-55 to +150)
(-55 to +150)
℃
Notes:
1. Measured at 1.0MHz and applied reverse voltage of 4.0V
2. Thermal resistance from junction to case per leg
3. Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency
with #10 screw.
E-mail: sales@cnmic.com
Web Site: www.cnmic.com