0.8mm Pitch Stacking Height 5 to 9mm Connector
FX6 Series
Stacking Height: 5 to 9mm
5~9mm
Mounting area 50% OFF, compared with the half pitch connector
Half pitch connector
(
)
FX2 series
FX6 series
(
)
If compared with 60 contacts
ꢀFeatures
1. Stacking Height 5 to 9mm
4. Automatic Mounting
The board to board stacking height can be set at every
millimeter between 5 and 9mm.
The standard packaging specification specifies the stick
package, considering the automatic mount, while the emboss
package can also correspond to the connector with less than
80 contacts. (However, the product is limited to 80 contacts.)
2. Effective Contact Length 1.7mm
Despite the low profile type connector, the connector has the
1.7mm long effective contact length and provides a margin 5. SMT Coplanarity
sufficient to contact.
The lead coplanarity on the SMT soldered area is maintained
with the high accuracy of less than 0.1mm.
3. Mating Guide
The self-alignment for mating action exhibits a high guide
level at 1mm, and makes the mating process easier by
providing the guide rib.
ꢀApplications
Note PC, business equipments such as handy terminals, and other equipment which require miniaturization or light-weight.
ꢀProduct Specifications
Current rating 0.5A
Operating Temperature Range -55ç to +85ç Note 1.
Storage Temperature Range -10ç to +60ç Note 2.
Rating
Voltage rating 100V AC Operating Humidity Range 40% to 80%
Storage Humidity Range 40% to 70%
Item
Specification
Condition
1. Insulation Resistance 100M ohms min
250V DC
2. Withstanding voltage
3. Contact Resistance
4. Vibration
300V AC/1 minute
100mA
No flashover or insulation breakdown.
40m ohms max.
No electrical discontinuity of 1µs or more
Contact resistance: 50m ohms max.
Insulation resistance: 100m ohms min.
Contact resistance: 50m ohms max:
Insulation resistance: 100m ohms min.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes 15 to 35ç: 2 to 3minutes)5 cycles
100 cycles
6. Temperature Cycle
7. Durability (Mating/un-mating) Contact resistance: 50m ohms max.
8. Resistance to Soldering
heat
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
A213