REVISION CH
FTS-1XX-XX-XX-XX-XX
OPTIONS
-P: PICK AND PLACE PAD (USE PPP-25)
(AVAILABLE ON POSITIONS 04 THRU 50)
(SEE FIG 5, SHT 2 & FIG 7, SHT 3)
(USE PPP-25-NT FOR TAPE & REEL)
-TR: TAPE & REEL PACKAGING (SEE FIG 10, SHT 4)
(SEE NOTE 16)
No OF POSITIONS
-02 THRU -50 (UNSHROUDED)
-05 THRU -46 (SHROUDED)
DO NOT
SCALE FROM
THIS PRINT
(No OF POS x .0500[1.27]) ±.010[0.25]
.050 1.27 REF
LEAD STYLE
SEE TABLE 1
(ONLY AVAILABLE WITH -DV OPTION)
-S: END SHROUDS (SEE FIG 3, SHT 2 & FIG 6 SHT 3)
(LEAD STYLE -02 & -03 ONLY)
PLATING SPECIFICATION
02
50
(05 POS MINIMUM, 46 POS MAXIMUM)
(NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR
ALIGNMENT PIN WITH SHROUD)
(SEE NOTES 6 & 7)
-L: 10µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.135 3.43
REF
C
L
-SA: END SHROUDS W/ ALIGNMENT PINS
(SEE FIG 4, SHT 2 & FIG 8, SHT 3)
(LEAD STYLE -02 & -03 ONLY)
-S: 30µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
01
49
(05 POS MINIMUM, 46 POS MAXIMUM)
(SEE NOTES 6 & 7)
FTS-XX-DV-XX
-SM: 30µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-A: MOLDED ALIGMENT PIN (USE FTS-XX-DV-XX)
(ONLY AVAILABLE IN -DV OPTION, 5 POS MINIMUM)
(SEE FIG 9, SHT 3)
(NOT AVAILABLE WITH -S OPTION; ORDER -SA FOR
ALIGNMENT PIN AND SHROUD)
-FR: FULL REEL QTY. TAPE & REEL (SEE NOTE 17)
TAIL OPTION
-LM: 10µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(No OF POS x .0500[1.270])
- .0500[1.270]
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
.016 0.41 SQ
REF (TYP)
-D: DOUBLE ROW THROUGH HOLE
-DV: DOUBLE ROW VERTICAL SURFACE MOUNT
2
MAX SWAY
(EITHER DIRECTION)
.050±.004 1.27±0.10
2
MAX SWAY
(EITHER DIRECTION)
"A"
(SEE NOTE 15)
.070 1.78 REF
(CONTACT AREA)
(SEE NOTE 5)
NOTES:
1.
REPRESENTS A CRITICAL DIMENSION.
2. PARTS MAY BE CUT TO POSITION.
.090±.010 2.29±0.25
(SEE NOTE 3)
3. SHEAR TAILS TO DIMENSION SHOWN.
4. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
5. GCOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.
6. 4 POSITIONS PER ROW WILL BE COVERED BY SHROUDS.
(2 POSITIONS PER ROW ON EACH END).
.034 0.86
REF
T-1SXX-XX-X
(SEE TABLE 1)
7. 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ALLOW
FOR SHROUDS, EXAMPLE FTS-125-02-L-D-SA REQUIRES A
29 POSITION BODY.
(SEE NOTE 13)
2
MAX SWAY
(EITHER DIRECTION)
8. NOTE DELETED.
FIG 1
9. MINIMUM PUSHOUT FORCE: .5 LB (8 OZ)
(No OF POS x .0500[1.270]) - .0500[1.270]
FTS-1XX-01-XX-D SHOWN
10. MAXIMUM CUT FLASH: .015[0.38]
11. PPP-25-NT MUST BE USED FOR ALL TAPE AND REEL PACKAGING.
12. FILL BODY SO THAT THE LEAD IN OF THE CORE IS ON THE TAILS SIDE
FOR -DV OPTION ONLY.
02
01
50
13. MAXIMUM BURR ALLOWANCE: .003[0.08]
14. FOR PACKAGING OPTION LEFT BLANK. POSITIONS -05 THRU -50
TO BE TUBED. POSITIONS -02 THRU -04 ON TAIL OPTION -D TO BE
LAYER PACKAGED. POSITIONS -02 THRU -04 ON TAIL OPTION -DV
TO BE TAPE AND REELED.
15. MAX HEIGHT VARIATION BETWEEN ROWS: .005[0.13].
16. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE
PACKAGED ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY
STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM.
17. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL,
BASED ON OPTIONS SELECTED.
C
L
49
MAY SUBSTITUTE ASP-61746-05-X
FOR RETENTION PURPOSES FOR -DV STYLE ONLY
.050±.006 1.27±0.15
90°±3°
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
"B"
+.005
-.000
.050
1.27+0.13
0.00
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
(SEE NOTE 4)
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.004[0.10
.XXX: .005 [.13]
.XXXX: .0020 [.051]
"B"
.230±.010 5.84±0.25
(SEE NOTE 3)
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.050 X .050 C.L. LOW PROFILE
TERMINAL STRIP ASSEMBLY
INSULATOR: LCP, UL 94 V0, COLOR: BLACK
TERMINAL: PHOS BRONZE
DWG. NO.
FIG 2
SEE NOTE 12
SEE NOTE 13
FTS-1XX-XX-XX-XX-XX
BRATCHER 11/29/1993 SHEET 1 OF 4
FTS-1XX-03-XX-DV SHOWN
SECTION "B"-"B"
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
BY:
F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW
5秒后页面跳转
MBRS340T3G手册解读：参数说明、产品特性及应用
PMOS管背靠背连接：串联还是并联？
高压电解电容的分类与选型策略
数码管：基本概念、分类、技术发展及市场趋势
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
