NOTES:
REVISION U
FTMH-1XX-XX-XX-DH-X-XX
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MAX. CUT FLASH: .015[.38]; NO FLASH ALLOWED IN OR AROUND
SURFACE MOUNT TAIL AREA.
3. MINIMUM PUSHOUT FORCE: 1 LB.
4. MAX. PIN VARIANCE : .005[.13].
No OF POSITIONS
-05 THRU -50
( PER ROW)
OPTION 2
-TR: TAPE & REEL
PACKAGING
DO NOT
SCALE FROM
THIS PRINT
LEAD STYLE SPEC
-03: .065 POST
5. SHEAR TAILS TO DIMENSION SHOWN, .003 [.08] MAX BURR.
6. COPLANARITY TO BE WITHIN .004 WHEN AT POSITION 05-25 AND
BE WITHIN .006 WHEN AT POSITION 26-50.
7. PINS 1 AND 2 TO BE FLUSH TO .0030 ABOVE LINE MADE BY THE BODY.
8. ENDWALL TO BE .008 MIN.
OPTION 1
-K: POLYIMIDE FILM PAD
(USE T-1S16-01-X-2)
-02: .075 POST
(-05 THRU -50 POSITIONS ONLY)
( USE T-1S16-01-X-2)
9. STRAIGHTNESS TO INCLUDED BODY.
PLATING SPEC
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
ROW SPECIFICATION
-DH: DOUBLE HORIZONTAL
(USE FTMH-75-D)
-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 Ni MIN ON TAIL
-LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
C
No. OF POS x .03937[1.000] .010[.25]
C
T-1S16-01-XX-2 (PIN 1)
"A"
T-1S16-01-XX-2 (PIN 2)
(SEE NOTE 4)
.020 0.50 REF
100
02
'A'
.125 3.18 REF
SEE TABLE 2
01
99
.03937 1.0000 REF
FTMH-XX-D
.102±.010 2.59±0.25
.190±.010 4.83±0.25
.012 0.30 SQ
REF (TYP)
.059 1.49
REF
TABLE 2
STRAIGHTNESS STRAIGHTNESS
TABLE 1
.102 2.59
NO OF POS
COPLANARITY
ROW 1
ROW 2
R.015 0.38
(4 PLCS)
LEAD STYLE
"A"
5-25
.004 [0.10]
.006 [0.15]
.004 [0.10]
.006 [0.15]
.004 [0.10]
.006 [0.15]
.015 0.38
-02
-03
.075 [1.91]
.065 [1.65]
.003 0.08 MAX
(SEE NOTE 7)
26-50
75 (SUB
ASSEMBLY ONLY)
.008[0.20]
.008[0.20]
.008[0.20]
C
C
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
PROPRIETARY NOTE
SEE TABLE 2
SEE TABLE 2
(SEE NOTE 9)
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
(SEE NOTE 9)
TOLERANCES ARE:
.010 0.25
MIN FLAT
.025 0.63 MIN FLAT
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.X: .1[2.5]
.XX: .01[.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.XXX: .005[.13]
.XXXX: .0020[.051]
DETAIL 'A'
SCALE 6 : 1
SHEET SCALE: 1:1
DO NOT SCALE DRAWING
MATERIAL:
BODY: LCP, UL 94 V0, COLOR: BLACK
TERMINAL: PHOS BRONZE, 510
1MM X 1MM HORIZONTAL SMT TERMINAL STRIP
DWG. FTMH-1XX-XX-XX-DH-X-XX
NO.
D. PURVIS
10/13/1998 SHEET OF
1
2
BY:
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DH-X-XX -MKT.SLDDRW