December 2009
FODM611
High Noise Immunity, 5V, 10Mbit/sec Logic Gate Output
(Open Collector) Optocoupler
Features
Description
■ High Noise Immunity characterized by common mode
The FODM611 is a 5V high-speed logic gate output
(open collector) optocoupler, which supports isolated
communications allowing digital signals to communicate
between systems without conducting ground loops or
hazardous voltages. It utilizes Fairchild’s patented
transient immunity (CMTi)
– 20kV/µs Minimum CMTi
■ High Speed
– 10Mbit/sec Date Rate (NRZ)
– 100ns max. Propagation Delay
– 35ns max. Pulse Width Distortion
– 40ns max. Propagation Delay Skew
■ -40 to +85°C temperature range
■ Safety and regulatory approvals
®
coplanar packaging technology, Optoplanar , and
optimized IC design to achieve high noise immunity,
characterized by high common mode transient immunity
specifications.
This optocoupler consists of an AlGaAS LED at the
input, optically coupled to a high speed integrated photo-
detector logic gate. The output of the detector IC is an
open collector schottky-clamped transistor. The coupled
parameters are guaranteed over the wide temperature
range of -40°C to +85°C. A maximum input signal of
5mA will provide a minimum output sink current of 13mA
(fan out of 8).
– UL1577, 3750 VAC
for 1 min.
RMS
– IEC60747-5-2 (pending approval)
Applications
■ Microprocessor system interface
2
– SPI, I C
Related Resources
■ www.fairchildsemi.com/products/opto/
■ Industrial fieldbus communications
– DeviceNet, CAN, RS485
■ Programmable logic control
■ Isolated data acquisition system
■ Voltage level translator
■ www.fairchildsemi.com/pf/FO/FODM8061.html
■ www.fairchildsemi.com/pf/FO/FODM8071.html
■ Isolating MOSFET/IGBT gate drivers
Functional Schematic
Truth Table
V
V
ANODE 1
6
5
CC
O
LED
Off
Output
High
On
Low
CATHODE
GND
3
4
©2009 Fairchild Semiconductor Corporation
FODM611 Rev. 1.0.1
www.fairchildsemi.com