Motion SPM) 2 Series, 600 V
FNA25060
General Description
The FNA25060 is a Motion SPM 2 module providing
a fully−featured, high−performance inverter output stage for AC
induction, BLDC, and PMSM motors. These modules integrate
optimized gate drive of the built−in IGBTs to minimize EMI and
losses, while also providing multiple on−module protection features:
under−voltage lockouts, over−current shutdown, temperature sensing,
and fault reporting. The built−in, high−speed HVIC requires only
a single supply voltage and translates the incoming logic−level gate
inputs to high−voltage, high−current drive signals to properly drive the
module’s internal IGBTs. Separate negative IGBT terminals are
available for each phase to support the widest variety of control
algorithms.
www.onsemi.com
Features
• UL Certified No. E209204 (UL1557)
• 600 V − 50 A 3−Phase IGBT Inverter, Including Control ICs for
SPMCA−A34
CASE MODFQ
Gate Drive and Protections
• Low−Loss, Short−Circuit−Rated IGBTs
• Very Low Thermal Resistance Using Al O DBC Substrate
2
3
MARKING DIAGRAM
• Built−In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB
Layout
$Y
• Separate Open−Emitter Pins from Low−Side IGBTs for Three−Phase
Current Sensing
FNA25060
&Z&K&E&E&E&3
• Single−Grounded Power Supply Supported
• Built−In NTC Thermistor for Temperature Monitoring and
FNA25060 = Specific Device Code
Management
$Y
&Z
&K
&E
&3
= ON Semiconductor Logo
= Assembly Plant Code
= Lot Code
= Space Designator
= 3−Digit Date Code
• Adjustable Over−Current Protection via Integrated Sense−IGBTs
• Isolation Rating of 2500 Vrms / 1 min.
• This Device is Pb−Free, Halogen Free/BFR Free and is RoHS
Compliant
Applications
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
• Motion Control − Industrial Motor (AC 200 V Class)
Related Resources
• AN−9121 − Users Guide for 600V SPM2 Series
• AN−9076 − Mounting Guide for New SPM2 Package
• AN−9079 − Thermal Performance of Motion SPM2 Series by
Mounting Torque
© Semiconductor Components Industries, LLC, 2015
1
Publication Order Number:
May, 2020 − Rev. 2
FNA25060/D