MODEL: FJPA
3: Mechanical contact (Excitation: 12 V @ 30 mA)
Space-saving Plug-in Signal Conditioners F-UNIT
[2] OUTPUT
Current
FREQUENCY TRANSMITTER
(field-programmable)
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
Voltage
Functions & Features
• Converting the output from a pulse-type transducer into a
standard process signal
6: 1 – 5 V DC (Load resistance 500 Ω min.)
• Micro-processor based
• Field-programmable frequency range
• Linearization available for flow compensation
• Averaging non-uniform pulses
• Excitation
[3] POWER INPUT
AC Power
K: 85 – 132 V AC
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
L: 170 – 264 V AC
• Loop testing via hand-held programmer PU-2x
• Highdensity mounting
(Operational voltage range 170 – 264 V, 47 – 66 Hz)
DC Power
Typical Applications
R: 24 V DC
• Positive displacement flowmeters, turbine flowmeters and
vortex flowmeters
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
P: 110 V DC
• Proximity switches
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
• Oval flowmeters
[4] OPTIONS
blank: none
26 (1.02)
/Q: With options (specify the specification)
100
(3.94)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
137
(5.39)
/C02: Polyurethane coating
mm (inch)
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
MODEL: FJPA–[1][2]–[3][4]
RELATED PRODUCTS
• Programming Unit (model: PU-2x)
ORDERING INFORMATION
• Code number: FJPA-[1][2]-[3][4]
• PC configurator software (model: JXCON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
Specify a code from below for each of [1] through [4].
(e.g. FJPA-3A-L/Q)
• Frequency range (e.g. 0 – 152.3 Hz)
• Linearization data (max. 16 points)
Use Ordering Information Sheet (No. ESU-1673) to specify
linearization data when the I/O signals are non-linear.
• Specify the specification for option code /Q
(e.g. /C01/S01)
GENERAL SPECIFICATIONS
Construction: Plug-in
Note: Consult factory on applications with a sensor handling
periodically (& quickly) changing frequency (e.g. oval
flowmeter).
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
[1] INPUT
1: Open collector (Excitation: 12 V @ 30 mA)
Overrange output: -10 – +120 % at 1 – 5 V
(0 – 120 % when 0 % input equals to 0 Hz.)
2: Voltage pulse (Excitation: 12 V @ 30 mA)
FJPA SPECIFICATIONS
ES-1473 Rev.13 Page 1/3
http://www.m-system.co.jp/