ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
ꢀ
(888) 473-2668
ꢀ
www.ipdconverters.com
FES SERIES - 300 WATT
DESCRIPTION
FEATURES
FES single output DC/DC converters provide up to
300 Watts of output power and up to 60 Amperes of
output current in a full brick package. The FES
converters feature open-frame packaging, along with
planar magnetics and a high efficiency topology, to
provide maximum useable power density. The FES
converters use 100% surface-mount construction and
are fully compatible with production board washing
processes.
• 60A “Full Brick”
• Very High Efficiency
• Open-Frame Packaging
• 100°C Baseplate
Operation
• Planar Magnetics
• Excellent Transient
Response
• 1500V Isolation
• Synchronous
Rectification
TECHNICAL SPECIFICATIONS
Input
Voltage Range
48 VDC Nominal
Undervoltage Lockout - Turn on / Turn off
36 - 75 VDC
34 / 32 VDC
Output
Setpoint Accuracy
±1%
Line Regulation Vin Min. - Vin Max., Iout Rated
0.2% Vout
Load Regulation Iout Min. - Iout Max., Vin Nom.
Remote Sense Headroom
0.2% Vout
0.5 VDC
Efficiency vs. Load (48V Input)
Minimum Output Current
10 % Iout Rated
95
90
85
80
75
70
65
60
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
25% Iout
4% Vout
500 µs
Voltage Trim Range
±10%
Current Limit Threshold Range, % of Iout Rated
OVP Trip Range
110 - 140%
FES200ZE-A
120 - 140% Vout Nom.
EFF. (36V)
EFF. (48V)
EFF. (75V)
OVP Type
Short Circuit/Over Current Protection
Self Recovering
Shutdown/Hiccup
General
10
20
30
40
50
60
70
80
90
100
Turn-On Time
10 ms
LOAD %
Remote Shutdown
Positive Logic
Remote Shutdown Reference
Switching Frequency
Isolation
Vin Negative
200 or 300 kHz
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
1500 VDC
1050 VDC
500 VDC
0.03%/°C
Notes
MTBF predictions may vary slightly from model to model.
†
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
-40 To +100°C
-40 To +125°C
105 To 125°C
5 g, 10 - 55 Hz
Consult Factory
UL, CUL, TUV
4.4 oz
Storage Range
Thermal Shutdown Range
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Weight (Approx.)
C-56