FDA901
Data brief
4 x 50 W class-D digital input automotive power amplifier with load current
monitoring and low voltage operation
Features
•
•
AEC-Q100 qualified
Integrated 110 dB D/A conversion
•
•
•
•
•
•
•
I2S and TDM digital input (3.3/1.8 V)
Input sampling frequency: 44.1 kHz, 48 kHz, 96 kHz and 192 kHz
Class-D channels with 93% efficiency
CISPR25 - Class V (Fourth Edition)
Low radiation function (LRF)
LQFP64 (exposed pad up)
GAPGPS01631
Idle tones free DAC
Output lowpass filter included in the feedback allowing superior audio
performance
•
High output power capability
–
28 W/4 Ω 10% THD, Vd = 14.4 V
–
Max. output power: 4 x 50 W/4 Ω @ 15.2 V, 1 kHz
•
Full I2C bus driving (3.3/1.8 V):
–
–
Channel independent Eco-Mode
Channel independent soft play/mute
–
I2C bus diagnostics, including DC and AC load detection and load value
recognition
•
•
•
Integrated fault protection
Input and output offset detector
Clipping detector
Product status link
FDA901
•
•
•
•
Real time load current monitoring (on I2C and TDM data lines)
ESD protection
Device summary
Order code
Package
Packing
6 V operation ("Start - Stop" engines compatibility)
2 and 1 Ω load driving capability
FDA901-VYY
FDA901-VYT
Tray
LQFP64
(exposed
pad up)
Tape &
Reel
Description
FDA901 is a new BCD technology Quad Bridge class D amplifier, specially intended
for car radio automotive applications.
Thanks to the technology used, it is possible to integrate a high performance D/A
converter together with powerful MOSFET outputs in class D, to get an outstanding
efficiency compared to the standard class AB.
The integrated D/A converter allows to reach outstanding performances (115 dB S/N
ratio with 110 dB of dynamic range). The feedback loop includes the output L-C low-
pass filter, allowing superior frequency response linearity and lower distortion
independently from the inductor and capacitor quality.
FDA901 is fully configurable through I2C bus, moreover it includes not only the most
complete load diagnostic matrix but also a unique real time load current acquisition
on I2C and I2S data lines, enabling sophisticated speaker monitoring functions.
Thanks to the solutions implemented to contain EMI emissions, the device is
intended to be used in the standard single DIN car-radio box together with the tuner.
DB3856 - Rev 1 - March 2019
For further information contact your local STMicroelectronics sales office.
www.st.com