Document 714
8 W Forward-Mode Transformers
•ꢀDesigned for forward topology operating at 250 kHz
•ꢀFive outputs from 3.3 V to 15 V; 18 – 36 V input
•ꢀ500 Vrms isolation from primary and aux to the secondary
•ꢀpecified by Texas Instruments for its LM5015 Two-Switch
Forward Regulator
Core material Ferrite
Terminations RoHS tin-silver over tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight 4.0 – 4.3 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 200 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick,
24 mm pocket spacing, 11.2 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Leakage
Input
voltage
range (V)
DCR max (mOhms)3
Turns ratio5
Part
Inductance2
nom (µH)
inductance4
max (µH)
number1
pri
sec
aux
pri : sec
pri : aux
Output6
FCT1-33L2SL_
FCT1-50L2SL_
FCT1-90L2SL_
FCT1-120L2SL_
FCT1-150L2SL_
324
324
324
324
324
65
65
65
65
65
22.5
31
105
150
223
460
490
490
535
470
0.530
0.585
0.570
0.525
0.600
18
18
18
18
18
–
–
–
–
–
36
36
36
36
36
1 : 0.5
1 : 1.39
1 : 1.39
1 : 1.39
1 : 1.39
1 : 1.39
3.3 V, 2.4 A
5 V, 1.6 A
9 V, 0.89 A
12 V, 0.67 A
15 V, 0.53 A
1 : 0.72
1 : 1.17
1 : 1.56
1 : 1.89
1. When ordering, please specify a packaging code:
FCT1-50L2SLD
Packaging: D = 13″ machine ready reel. EIA-481 embossed plastic tape
(200 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer
added ($25 charge), use code letter D instead.
2. Inductance is measured at 250 kHz, 0.3 Vrms, 0 Adc.
Dot above pin1
3. DCR for the secondary is measured with the windings connected in parallel.
4. Leakage inductance is for the primary and is measured with the secondary shorted.
5. Turns ratio is with the secondary windings connected in parallel.
6. Output is with the secondary windings connected in parallel. Auxiliary winding output is 10 V, 20 mA.
7. Electrical specifications at 25°C.
0.433
11,00
max
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.004/0,10
0.041
1,05
0.600
15,24
max
Recommended
Land Pattern
1
8
7
0.050
1,27
0.413
10,50
Primary
0.024
0,60
0.080
2,03
0.460
11,68
Secondary
2
5
8
4
1
1
6
5
3
0.50
max
12,7
Auxiliary
4
0.098
2,50
0.098
2,50
Secondary windings to be connected in
parallel on PC board.
inches
mm
Dimensions are in
Document 714 Revised 02/18/09
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.